BACnet/IP Devices
Refine your search
446 Topic(s)
Concept
The RS-485 Power Adapter can be used for injecting 24 VDC from an external 24 VDC power supply to an RS-485 based network such as Room Bus or Sensor Bus. This is useful, for example, in applications where you want to extend the RS-485 bus by connecting (daisy-chaining) additional devices, which the RP or MP controller would otherwise not be able to power. The external power supply is connected to the bus via the adapter.
Concept
This section provides grounding and power recommendations for system configurations with the RP-C controller models that support 230 VAC input power.
Concept
The RP-C 230 V controller models RP-C-16A-F-230V and RP-C-16B-F-230V have a 24 VAC (19 VA) Class 2 output that can be used to power external loads such as actuators, relays, or indicators. The external loads can be controlled using the controller's solid-state relay (SSR) or relay outputs.
Concept
The RP-C-16B-F-230V model has 16 I/O points and the controller is equipped with 30 fixed screw terminals.
Concept
The RP-C-16A-F-230V model has 16 I/O points and the controller is equipped with 30 fixed screw terminals.
Hardware Installation
Part numbers: SXWRCF16A10003 and SXWRCF16B10002
How to
You perform the following steps to power up an RP-C 24 V controller model.
Concept
The output override function allows you to manually override outputs. This function can be used for testing, commissioning, and maintenance of equipment.
Concept
In addition to the MP controllers and the b3 and MNB families of BACnet MS/TP controllers, the EcoStruxure smoke control system also supports the proprietary Infinet i2 family of controllers when connected to the AS-P-SMK smoke control server. The AS-P-SMK and AS-P-NLS-SMK Servers provide integrated support for the Infinet i2 controllers and has been part of the UL864 system listing since evaluation in 2018.
Concept
The EcoStruxure smoke control system supports the MP controllers and IP-IO modules mentioned previously in this guide.