Benutzeroberfläche
AS-P Server LEDs
There are several LEDs on the front panel of an AS-P server.
The AS-P server comes in different models. The AS-P model has nine LEDs whereas the AS-P-NL model has seven LEDs.
|
Function |
Color |
|
RS-485 A, Tx |
Yellow |
|
RS-485 A, Rx |
Green |
|
RS-485 B, Tx |
Yellow |
|
RS-485 B, Rx |
Green |
|
Ethernet 1, Link/Act/Speed |
Green/Yellow |
|
Ethernet 2, Link/Act/Speed |
Green/Yellow |
|
LON, Tx a |
Yellow |
|
LON, Mode a |
Red |
|
Status (AS-P server) |
Green/Red |
- The AS-P server model AS-P-NL does not have LEDs for LonWorks (LON).
The AS-P server Ethernet and Status indicators comprise two LEDs (green/yellow and green/red respectively) in one structure. Normally, when one LED is lit, the other is not lit and vice versa, that is, the indicator will show one color at a time.
The LEDs indicate status of theAS-P server and the ongoing communication.
Status LED
The automation server Status LED indicates the condition of the device.
|
LED Patterns |
Condition |
|
Green, constant |
Normal operation, status OK |
|
Green, flashing (~1 Hz) |
Device restarting, wait |
|
Green, flashing (~10 Hz) |
Device shutting down |
|
Red, constant |
Detected error, attention required |
|
Red, flashing (~1 Hz) |
Device operates, but a problem needs attention |
|
Red/green, flashing (~1 Hz) |
Device firmware upgrade (DFU) mode or firmware being downloaded in DFU mode |
|
No light |
No input power |
RS-485 LEDs
The RS-485 (COM A and COM B) LEDs indicate the condition of the RS-485 communication.
|
LED Patterns |
Condition |
|
Yellow, flashing (Tx) |
Transmit data |
|
Green, flashing (Rx) |
Receive data |
Ethernet LEDs
The Ethernet (1 and 2) LEDs indicate the condition of the Ethernet communication.
|
LED Patterns |
Condition |
|
Green, flashing |
10 Mbit communication |
|
Yellow, flashing |
100 Mbit communication |
LON LEDs
The LON LEDs indicate the condition of the LonWorks RS-485 communication.
|
LED Patterns |
Condition |
|
Yellow, flashing (Tx) |
LON communication RS-485 |
|
Red, short flash (Mode) |
During start-up; otherwise for future use |
The AS-P server model AS-P-NL does not have LonWorks (LON) LEDs.
AS-P Servers
Status LEDs