Concepto
System Alarm ID A-D
Listed below are the System Alarms with IDs that begin with the letters A-D.
|
System Alarm ID |
Description |
|
A log data transfer was missed |
The extended trend may have failed to read records. |
|
A log sample was missed |
A log sample was missed. |
|
Alarm signal trigger buffer full |
The alarm is unable to handle all value changes. |
|
An error was found in a communication module during server startup |
An error was found in a communication module during server startup. |
|
Archive directory does not exist |
The directory path is not valid. |
|
Archive directory does not exist. Retrying in 5 minutes |
The directory path is not valid. The system will restart the archive process in 5 minutes. |
|
Archive path must be set to enable archiving |
The destination path for the archive file is not defined. |
|
Archiving canceled due to configuration change |
The archiving process was canceled due to configuration changes made during the process. |
|
Archiving failed because of an ongoing operation |
The archiving process failed due to an ongoing operation in Building Operation. |
|
Archiving is not enabled |
Archiving is disabled when a manual archive is initiated. |
|
System Alarm ID |
Description |
|
BACnet did not start |
The BACnet communication protocol did not start. |
|
BACnet server failure |
There was an internal BACnet error. |
|
Bad lead object reference |
Updating shadow object failed because the lead object has an empty type. |
|
Bad lead object type |
Updating shadow object failed. Type mismatch between lead object and shadow object. |
|
Blacklisted device detected |
The physical device currently occupying the slot configured for this module has previously reported a Device Address Changed error, and the configuration will not be loaded to the device. Para obtener más información, consulte Device Address Changed . |
|
System Alarm ID |
Description |
|
Cannot enable archiving |
The Archiving function is not enabled. |
|
Cannot verify lead object status |
Updating shadow object failed. Status of the lead object is unknown. |
|
Communication failed |
Communication failed |
|
Communication failed Authentication error |
Wrong domain or wrong credentials in server to server communication. |
|
Communication failed Authorization error |
Insufficient user permissions to communicate with server. |
|
Communication failed Configuration error |
Server communication failed to start with current communication settings. |
|
Communication failed Domain is not available |
The requested communication domain is not defined in the server. |
|
Communication failed Hostname is invalid |
Bad configuration of host name. |
|
Communication failed Unexpected Server fullpath |
Server path is invalid. |
|
Communication failed Unexpected Server type |
The server you tried to add is not compatible with the system. |
|
Communication failed Version Mismatch |
Communication attempt failed between servers with incompatible versions. |
|
Corrupt backup set is detected |
A corrupt backup set was generated on a SmartStruxure server device. Backup the server again. |
|
CWS Alarm Poll failed |
The EcoStruxure Web Services interface failed to poll an alarm from an EcoStruxure Web Services server. |
|
CWS Browse failed |
The EcoStruxure Web Services nterface failed to browse the database from an EcoStruxure Web Services server. |
|
CWS GetHistory failed |
The EcoStruxure Web Services interface failed to get a trend log from an EcoStruxure Web Services server. |
|
CWS GetObject failed |
The EcoStruxure Web Services interface failed to get an EcoStruxure Web Services object from an EcoStruxure Web Services server. |
|
CWS Method Error |
The EcoStruxure Web Services interface failed while calling an EcoStruxure Web Services method from an EcoStruxure Web Services server. |
|
CWS Value Poll failed |
The EcoStruxure Web Services interface failed to poll a value from an EcoStruxure Web Services server. |
|
System Alarm ID |
Description |
|
|
Database file is corrupt |
A file in the configuration is corrupt. |
|
|
Database update failed |
There was a failure when trying to save a value or setting. |
|
|
Device address changed |
The physical IO module detects a change in its communication address, which is likely due to a hardware failure on the IO bus. This alarm requires immediate attention. Para obtener más información, consulte Device Address Changed . |
|
|
Device offline |
The server cannot connect to the specified device. |
|
|
Driver loading disabled |
The loading of SmartDriver driver is disabled. Para obtener más información, consulte Load SmartDriver Drivers at Startup . |
|
|
Driver unexpectedly timed out |
The SmartStruxure server device software encountered an unexpected problem while trying to communicate with the IO driver of the server. |
|
|
Duplicate device address |
More than one device has the same MAC address and network ID. |
|
|
Duplicate device identifier |
There are two or more devices within an interface with the same device identifier. The system may trigger a system alarm and place the duplicate in the Unconfigured Devices folder. Para obtener más información, consulte Unconfigured Devices . |
|
|
Duplicate device name |
There are two or more devices in a container or network with the same device name. |
|
|
Duplicate network identifier |
There are two or more networks within an interface with the same Network identifier. The system may trigger a system alarm and place the duplicate in the Unconfigured Devices folder. Para obtener más información, consulte Unconfigured Devices . |
|
|
Duplicate of local network |
There are two or more networks within an interface with the same Local Network identifier. The system may trigger a system alarm and place the duplicate in the Unconfigured Devices folder. Para obtener más información, consulte Unconfigured Devices . |
System Alarm ID List
System Alarms
System Alarm ID E-L
System Alarm ID M-NW8 R
System Alarm ID NW8 S-NW8 Z
System Alarm ID P-S
System Alarm ID T-X
Device Address Changed
Unconfigured Devices