Konzept
MP-C Screw Terminals
The MP-C is delivered with terminal blocks installed on the device. The MP-C uses pluggable terminal blocks, which are easy to install and remove from the device.
The only exception is the high power relay outputs on the MP-C-15A and MP-C-18A models, which use a two-position fixed terminal block due to current requirements.
Spare terminal blocks can be ordered separately using the part number SXWMPCCON1.
The wiring recommendations are provided separately. Für weitere Informationen siehe Wiring .
MP-C-15A Screw Terminals
MP-C-15A has 15 I/O points and the controller is equipped with six pluggable terminal blocks and one fixed terminal block.
Für weitere Informationen siehe MP-C-15A Screw Terminals .
MP-C-18A Screw Terminals
MP-C-18A has 18 I/O points and the controller is equipped with seven pluggable terminal blocks and one fixed terminal block.
Für weitere Informationen siehe MP-C-18A Screw Terminals .
MP-C-18B Screw Terminals
MP-C-18B has 18 I/O points and the controller is equipped with seven pluggable terminal blocks.
Für weitere Informationen siehe MP-C-18B Screw Terminals .
MP-C-24A Screw Terminals
MP-C-24A has 24 I/O points and the controller is equipped with seven pluggable terminal blocks.
Für weitere Informationen siehe MP-C-24A Screw Terminals .
MP-C-36A Screw Terminals
MP-C-36A has 36 I/O points and the controller is equipped with 10 pluggable terminal blocks.
Für weitere Informationen siehe MP-C-36A Screw Terminals .
MP-C Controllers
MP-C-15A Screw Terminals
MP-C-18A Screw Terminals
MP-C-18B Screw Terminals
MP-C-24A Screw Terminals
MP-C-36A Screw Terminals
Wiring