Concept
MP-C Models
The MP-C controller is available in five models that support BACnet/IP communication. These five models offer five different combinations (sets) of the number of I/O points and types of I/O points. The MP-C controller also comes in two models that only support BACnet MS/TP communication.
|
Range |
Model |
BACnet |
I/O Set |
I/O Points |
|
SpaceLogic MP-C Pro |
MP-C-15A a |
IP |
15A |
15 |
|
SpaceLogic MP-C Pro |
MP-C-18A a |
IP |
18A |
18 |
|
SpaceLogic MP-C Pro |
MP-C-18B a |
IP |
18B |
18 |
|
SpaceLogic MP-C Pro |
MP-C-24A a |
IP |
24A |
24 |
|
SpaceLogic MP-C Pro |
MP-C-36A a |
IP |
36A |
36 |
|
EasyLogic MP-C |
MP-C-24A-M |
MS/TP |
24A |
24 |
|
EasyLogic MP-C |
MP-C-36A-M |
MS/TP |
36A |
36 |
- This model is available in a Buy American Act (BAA) compliant variant, which has the suffix “-BAA” in the name. For more information, see the SpaceLogic MP-C Pro Specification Sheet. The BAA compliant variant does not differ in terms of hardware and functionality.
For more information, see MP-C Onboard I/O .
MP-C-15A, MP-C-18A, and MP-C-18B have the same small footprint. MP-C-24A and MP-C-36A have a slightly larger footprint.
The EasyLogic MP-C models differ significantly from the SpaceLogic MP-C models not only in terms of the supported BACnet communication protocol, but also with regards to several other features.
The EasyLogic models have an “-M” in the product name.
|
Feature |
MP-C-15A, MP-C-18A, MP-C-18B, MP-C-24A, MP-C-36A |
MP-C-24A-M, MP-C-36A-M |
|
Built-in wireless connectivity |
no a |
no |
|
Ethernet ports |
2 |
0 |
|
USB ports |
2 b |
0 |
|
RS-485 ports with RJ45 interface |
1 (Com A) c |
0 |
|
RS-485 ports supporting Isolated RS-485 Adapter d |
Com A |
- |
|
RS-485 ports supporting Non-isolated RS-485 Adapter or RS-485 Power Adapter e |
Com A |
- |
|
RS-485 port with screw terminals |
0 |
1 f |
|
I/O and power input terminals/connectors |
Removable screw terminals |
Fixed screw terminals |
|
MS/TP address configuration |
- |
DIP switch |
|
Room bus support |
no |
no |
|
Sensor bus support |
yes |
no |
|
Modbus support |
no |
|
|
RTD sensor support |
yes |
no |
|
LED(s) |
5 i |
3 j |
|
Real-time clock |
yes |
yes |
|
Input power |
24 VAC or 24-30 VDC |
24 VAC or 24-30 VDC |
|
Power input type |
Non-isolated |
Non-isolated |
|
CPU type |
Dual-core |
Dual-core |
|
Memory (RAM / NOR flash / FRAM) |
128 MB / 32 MB / 128 kB |
128 MB / 32 MB / 128 kB k |
|
MP-C DISPLAY support l |
yes |
no |
- The SpaceLogic Bluetooth Adapter (SXWBTAECXX10001) can be used to add wireless connnectivity to the controller. The adapter is connected to a SpaceLogic Sensor on the Sensor Bus.
- 1 USB host port and 1 USB device port.
- Load: max. 2 W.
- Isolated RS-485 Adapter (SXWISORS48510001) can be used for converting the RS-485 port with RJ45 interface to screw terminals.
- Non-isolated RS-485 Adapter (SXWNISORS48510001) and RS-485 Power Adapter (SXWNISORS485P10001) can be used for converting the RS-485 port with RJ45 interface to screw terminals. RS-485 Power Adapter (SXWNISORS485P10001) can also be used for power injecton on Sensor Bus.
- Dedicated for BACnet MS/TP bus. Removable 3-pole screw terminal block.
- The RS-485 port (Sensor Bus) can be reconfigured for Modbus.
- The KNX Modbus Gateway (RP-C-EXT-KNX) is not supported.
- 1 Status LED, 2 RS-485 LEDs, and 2 Ethernet LEDs.
- 1 Status LED and 2 RS-485 LEDs.
- MP-C-24A-M and MP-C-36A-M with hardware version earlier than 03/02 have a FRAM memory with a size of 8 kB. For these hardware versions, the use of Script programs is recommended to save FRAM memory space.
- Optional MP-C override display module (SXWMPCDSP10001).
Hardware Overview
MP-C Controllers
SpaceLogic MP-C Pro
MP-C Onboard I/O