Log on to rate and give feedback
1
2
3
4
5
Log on to rate
0
Concepto
Productos
MP-C
Funcionalidades:
Hardware
Versión del producto:
2023, 2024
20/06/2023
Relay Outputs
The relay outputs support digital Form A point types. The Form A relays are designed for direct load applications.
The outputs can be configured as one of the following types:
Digital output
Digital pulsed output
Pulse width modulated output
Tristate output
Tristate pulsed output
Consider the expected number of operation cycles specified for the relay output (cycle life rating) when configuring the period for a pulse width modulated (PWM) output point.
Outputs
The DO relay outputs are Form A digital outputs, which means the outputs are normally open contacts with one common terminal (C) and one normally open terminal (NO). The terminals are isolated from other circuits of the device and from signal ground.
Figura:
Form A digital output internal configuration
Especificaciones
Channels, MP-C-15A
|
0
|
Channels, MP-C-18A
|
3, DO5 to DO7
|
Channels, MP-C-18B
|
0
|
Channels, MP-C-24A
|
4, DO1 to DO4
|
Channels, MP-C-36A
|
8, DO1 to DO8
|
Channels, MP-C-24A-M
|
4, DO1 to DO4
|
Channels, MP-C-36A-M
|
8, DO1 to DO8
|
Contact rating
|
250 VAC/30 VDC, 2 A, Pilot Duty (C300)
|
Switch type
|
Form A Relay
|
Single Pole Single Throw
|
|
Normally Open
|
|
Isolation contact to system ground
|
3000 VAC
|
Cycle life (Resistive load)
|
At least 100,000 cycles
|
Minimum pulse width
|
100 ms
|
MP-C Controllers
MP-C Models
MP-C Onboard I/O