Konzept
MP-V Damper Actuator
The MP-V has an integrated damper actuator, which allows for simplified installation of MP-V directly over the damper shaft.
The integrated damper actuator eliminates the need for separate installation, wiring, and positioning of the damper motor.
MP-V uses the same actuator mechanics as many Schneider Electric VAV controller models from Andover Continuum, TAC Vista, TAC I/A Series, and TAC I/NET product lines.
The actuator provides a Hall effect feedback signal that indicates actual movement, enabling an accurate indication of actual damper position. This provides a basis for precise position control that accepts a command from 0 to 100%.
The actuator also features a push button for manual positioning of the damper during commissioning and two stop screws for adjustment of the travel range.
Hardware Overview
MP-V Controllers