Concept
Safety Information
Important Information
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
|
|
|
|
The addition of this symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed. |
|
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. |
Danger
|
|---|
|
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. |
Warning
|
|---|
|
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. |
Caution
|
|---|
|
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. |
Please Note
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
A qualified person is one who has skills and knowledge related to the construction, installation, and operation of electrical equipment and has received safety training to recognize and avoid the hazards involved.
General Cybersecurity Information
|
Warning
|
|---|
|
POTENTIAL COMPROMISE OF SYSTEM AVAILABILITY, INTEGRITY, AND CONFIDENTIALITY Use cybersecurity best practices to help prevent unauthorized access to the software. Failure to follow these instructions can result in death, serious injury, equipment damage, or permanent loss of data. |
In recent years, the growing number of networked machines and production plants has seen a corresponding increase in the potential for cyber threats, such as unauthorized access, data breaches, and operational disruptions. You must, therefore, consider all possible cybersecurity measures to help protect assets and systems against such threats.
To help keep your Schneider Electric products secure and protected, it is in your best interest to implement the cybersecurity best practices as described in the Cybersecurity Best Practices document.
Schneider Electric provides additional information and assistance:
Subscribe to the Schneider Electric security newsletter .
Visit the Cybersecurity Support Portal web page to:
Find Security Notifications.
Report vulnerabilities and incidents.
Visit the Schneider Electric Cybersecurity and Data Protection Posture web page to:
Access the cybersecurity posture.
Learn more about cybersecurity in the cybersecurity academy.
Explore the cybersecurity services from Schneider Electric.
Safety Precautions
During installation or use of this software, pay attention to all safety messages that occur in the software and that are included in the documentation. The following safety messages apply to this software in its entirety.
|
Warning
|
|---|
|
UNINTENDED EQUIPMENT OPERATION
Failure to follow these instructions can result in death or serious injury, or equipment damage. |
|
Warning
|
|---|
|
INACCURATE DATA RESULTS
Failure to follow these instructions can result in death, serious injury, equipment damage, or permanent loss of data. |
It is important to verify that application programs are working as expected before downloading the application programs to the controllers and servers. When the application programs are downloaded, verify that they are downloaded correctly by verifying that the system operates as expected. This applies to initial system installations, system upgrades, and changes in an operational system.
|
Warning
|
|---|
|
UNINTENDED EQUIPMENT OPERATION
Failure to follow these instructions can result in death, serious injury, or equipment damage. |