Konzept
RP Controller Expansion Module and Multi-sensor Maintenance Modes
The RP controller expansion modules and multi-sensors support different modes that can be used for maintenance purposes.
The following maintenance modes are supported:
Offline maintenance mode
Online maintenance mode
The Status LED on the RP controller expansion modules and multi-sensors indicates when the device is in maintenance mode, provided that the LED is configured in show status mode (default mode). Für weitere Informationen siehe RP Controller Expansion Module LEDs .Für weitere Informationen siehe RP Controller Expansion Multi-sensor LED .
The device enters maintenance mode and goes offline when you configure the room bus address 0 for the device using its rotary switch.
In online maintenance mode, the device will be online but without running any software other than what makes it possible to read diagnostics from the device and to upgrade the device.
Für weitere Informationen siehe Configuring an RP Controller Expansion Module or Multi-sensor into Online Maintenance Mode .
RP Controller Expansion Modules and Multi-sensors
Light Modules
Blind Modules
RP-C-EXT-DALI-M-PD
RP-C-EXT-0-10V-4-PD
RP-C-EXT-BL-4-HV-PD
RP-C-EXT-BL-2-LV-PD
RP-C-EXT-DALI
RP-C-EXT-0-10V-4
RP-C-EXT-BL-SMI-4-HV-PD
RP-C-EXT-BL-SMI-2-LV-PD
RP-C-EXT-REL-4
CRS-HH-REL-10
RP-C-EXT-MS-BLE
RP Controller Expansion Module LEDs
RP Controller Expansion Multi-sensor LED
Configuring an RP Controller Expansion Module or Multi-sensor into Online Maintenance Mode
RP-C Room Bus
Connecting RP Controller Expansion Modules and Multi-sensors to RP-C
RP Controller Expansion Module Room Bus Addressing
Configuring the Room Bus Address for an RP Controller Expansion Module
Configuring the Room Bus Address for an RP Controller Expansion Sensor Module
RP Controller Expansion Module Diagnostics
Retrieving RP Controller Expansion Module Diagnostics