Concepto
RP Controller Expansion Module Maintenance Modes
The RP controller expansion modules support different modes that can be used for maintenance purposes.
The following maintenance modes are supported:
Offline maintenance mode
Online maintenance mode
The Status LED on the RP controller expansion modules indicates when the device is in maintenance mode, provided that the LED is configured in show status mode (default mode). Para obtener más información, consulte RP Controller Expansion Module LEDs .Para obtener más información, consulte RP Controller Expansion Sensor Module LED .
The device enters maintenance mode and goes offline when you configure the room bus address 0 for the device using its rotary switch.
In online maintenance mode, the device will be online but without running any software other than what makes it possible to read diagnostics from the device and to upgrade the device.
Para obtener más información, consulte Configuring an RP Controller Expansion Module into Online Maintenance Mode .
RP Controller Expansion Modules
Light Modules
Blind Modules
Relay Modules
Sensor Modules
RP-C-EXT-DALI-M-PD
RP-C-EXT-0-10V-4-PD
RP-C-EXT-BL-4-HV-PD
RP-C-EXT-BL-2-LV-PD
RP-C-EXT-DALI
RP-C-EXT-0-10V-4
RP-C-EXT-BL-SMI-4-HV-PD
RP-C-EXT-BL-SMI-2-LV-PD
RP-C-EXT-REL-4
CRS-HH-REL-10
RP-C-EXT-MS-BLE
RP-C-EXT-IS-BLE
RP Controller Expansion Module LEDs
RP Controller Expansion Sensor Module LED
Configuring an RP Controller Expansion Module into Online Maintenance Mode
RP-C Room Bus
Connecting RP Controller Expansion Modules to an RP Controller
RP Controller Expansion Module Room Bus Addressing
Configuring the Room Bus Address for an RP Controller Expansion Module
Configuring the Room Bus Address for an RP Controller Expansion Sensor Module
RP Controller Expansion Module Diagnostics
Retrieving RP Controller Expansion Module Diagnostics