Comment faire pour
Removing an External Connector from an RP Controller Expansion Module or RP-C-16C-F-230V Controller
You remove an external connector from an RP controller expansion module to disconnect lights, blinds, dry contact digital inputs, or AC power from the module. You remove an external connector from an RP-C-16C-F-230V controller to disconnect 230 VAC power from the controller, to disconnect an external 24 VAC/VDC power supply, or to disconnect equipment controlled via the SSR outputs and/or universal inputs/outputs.
The RP controller expansion modules have PCB mounted connectors for the power input, outputs, and digital inputs. The PCB mounted connectors mate with pluggable connectors:
The light modules, blind modules, and the RP-C-EXT-REL-4 relay module have mechanically keyed and color-coded connectors, which allows the matching external connectors to be plugged in on site quickly and easily.
The CRS-HH-REL-10 relay module has PCB header connectors for pluggable screw terminal blocks, which are easy to install and remove from the device.
Light Modules, Blind Modules, and RP-C-EXT-REL-4 Relay Module
The pluggable connectors mean time savings and cost reductions for the installation, compared to wiring terminal blocks on site. The connectors can quickly and easily be plugged together on site.
The RP controller expansion modules use 2, 3, 4 or 5 pole connectors for the different inputs and outputs. The 4-pole connector has a 5-pole frame.
The connectors are mechanically keyed, which means the following connections cannot be made:
A connector for AC mains and high-voltage applications cannot be plugged into a connector for low-voltage applications.
A connector for low-voltage applications cannot be plugged into a connector for AC mains and high-voltage applications.
The matching connectors are locked together.
The connectors are also color-coded to help the installers and electricians to choose the correct, matching external connector. The connectors are color-coded:
Black: For AC mains power applications such as power supply input, blind high-voltage outputs, SMI (HV) blind outputs, and relay outputs.
Pastel blue: For dimming applications such as DALI inputs/outputs and 0-10V light outputs with power distribution.
Light blue: For low-voltage applications such as blind low-voltage outputs (24 VDC), 0-10V light outputs without power distribution, SMI LoVo (LV) blind outputs, and digital inputs (5 VDC).
The matching external connectors are not provided but need to be ordered separately from Schneider Electric. Pour plus d'informations, voir Required External Connectors for the RP Controller Expansion Modules .
CRS-HH-REL-10 Relay Module
The CRS-HH-REL-10 relay module uses pluggable screw terminal blocks, which are easy to install and remove from the device.
The terminal blocks are delivered in a plastic bag with the device.
The terminal blocks are used as follows:
2-pole terminal blocks (x10) for the relay outputs
9-pole terminal blocks (x2) for the digital inputs
|
Terminal Block Connector |
Recommended Torque |
|
2-pole |
0.5 Nm (4.4 lbf.in) |
|
9-pole |
0.2 Nm (1.7 lbf.in) |
The RP-C-16C-F-230V controller model has PCB mounted connectors for the power input, the input for an external 24 VAC/VDC power supply, the SSR outputs, and the universal inputs/outputs. The PCB mounted connectors mate with pluggable connectors. The PCB mounted connectors are mechanically keyed and color-coded, which allows the matching external connectors to be plugged in on site quickly and easily.
The pluggable connectors mean time savings and cost reductions for the installation, compared to wiring terminal blocks on site. The connectors can quickly and easily be plugged together on site.
The RP-C-16C-F-230V controller uses 2, 3, or 4 pole connectors for the different inputs and outputs.
The connectors are mechanically keyed, which means the following connections cannot be made:
A connector for AC mains cannot be plugged into a connector for low-voltage applications.
A connector for low-voltage applications cannot be plugged into a connector for AC mains.
The matching connectors are locked together.
The connectors are also color-coded to help the installers and electricians to choose the correct, matching external connector. The connectors are color-coded:
Black: For AC mains (230 VAC) power input.
White:
For 24 VAC/VDC external power supply input.
For SSR outputs with 24 VAC/VDC power distribution.
Light blue: For universal inputs/outputs (which are designed for low-voltage applications).
Turquoise blue: For configurable I/Os (which can be configured either as SSR outputs or universal inputs/outputs).
The matching external connectors are not provided but need to be ordered separately from Schneider Electric. Pour plus d'informations, voir Required External Connectors for the RP-C-16C-F-230V Controller Model .
Use a small screwdriver to press and hold down the connector locking tab and then gently pull the external connector until the tab is released from the locking latch (slot).
action_zoom_plus_stroke 
Pull the external connector straight away from the mating connector.
action_zoom_plus_stroke 
RP Controller Expansion Module Pluggable Connectors
RP-C-16C-F-230V Pluggable Connectors
Plugging an External Connector into an RP Controller Expansion Module or RP-C-16C-F-230V Controller
Required External Connectors for the RP Controller Expansion Modules
Required External Connectors for the RP-C-16C-F-230V Controller Model
RP Controller Expansion Module Device Installation
RP-C Models