Conceito
Wire Sizes and Lengths for the DALI Bus of the RP Controller Expansion DALI Light Modules
This section provides recommendations on wire sizes and lengths for the DALI bus of the RP controller expansion DALI light modules.
The DALI bus is connected to the Light outputs of the DALI light modules. The Light outputs have two terminals, labeled DA+ and DA-, to which the two-wire bus is connected.
The recommendations are for guidance only. Other wire sizes and lengths may be used, depending on wiring rules and when appropriate.
Only copper wires should be used for the DALI bus.
|
Minimum Cross-sectional Area |
Cable Length |
|
0.5 mm² (20 AWG) |
Up to 100 m (328 ft) |
|
0.75 mm² (18 AWG) |
Up to 150 m (492 ft) |
|
1.5 mm² (15 AWG) |
Up to 300 m (984 ft) |
I/O Wiring
Wire Sizes and Lengths
Wire Sizes and Lengths for the Digital Inputs of the RP Controller Expansion Modules
DALI Light Outputs with Power Distribution
DALI Light Outputs without Power Distribution