Turning the Lights On and Off

In the SpaceLogic Sensor Touchscreen Display model, you turn lights on and off in order to increase or decrease living space illumination and conserve energy. You enable this feature using the Allow light control property in the Display object. You then use the Toggle lights , Button (1-12) function in the Button and Scene Configuration page to toggle the lights on and off. You can also use the Lighting mode property to allow the integrator to perform a Digital toggle for the lighting control menu as described here.

Afficher plus

action_close

You use the SpaceLogic Sensor Display property tabs in WorkStation to view and configure the UI features of the various sensor models within your control application.

Property Tabs

The Display Basic tab properties includes the same General Information you find on all EcoStruxure Building Operation objects. Beyond that, it also provides a Setpoint , a Fan speed , an Occupancy override , an HVAC mode , a Heating cooling status , and 4 Custom value text fields. In addition, there are several properties that allow you to control the temperature display. For example, the Temperature display mode allows you to configure the temperature value displayed on the SpaceLogic Sensor display in its passive display state with the following settings:

Live Temperature : Displays the space temperature measured by the SpaceLogic sensors internal temperature sensor
Temperature setpoint : Displays the current setpoint temperature value
Custom temperature : Displays the value of the Custom temperature property

The Custom temperature property then allows you to display any value in the temperature range, either by referencing another temperature source (for example, an external temperature sensor) or by setting it manually in the Custom temperature field (warm start retained only).

Advanced Tab

The Display Advanced property tab includes considerably more configuration information. For example, you turn on the Allow menu page property to display all submenus including the Functions menu and any of its submenus. Should you wish, you can enable the temperature setpoint feature by setting the Display object Allow setpoint changes property to On and configuring the Setpoint high limit and Setpoint low limit properties. If colored wall back lighting feedback is required for the room occupant, you can turn on the Enable wall back lighting property.

Déclaration

Allow setpoint changes, Setpoint high limit, and Setpoint low limit are the types of properties you may wish to drive dynamically based on time of day. For example, using a schedule, you may only allow setpoint changes during the day and not at night. You may also only change the high and low limits for the setpoint based on whether you are in the heating or cooling season.

In addition, you can use the Occupancy override icon property and its Command and State options as follows:

Command : When occupied, the house is empty. When clicked, the Command to vacate or unoccupy is sent.

When unoccupied, the house displays with a person inside. When clicked, the Command to occupy is sent.
State : When the house displays with a person inside, it indicates the current state is occupied. When clicked, the State command to unoccupy is sent.

When unoccupied, the house is empty to indicate its current state. When clicked, the State command to occupy is sent.

Finally, you can enable lighting and blind control functions using the Display object Allow light control and Allow blind control properties. Within the light function, you can toggle on and off or set a percentage to control the intensity of the lights using the Lighting mode property. Similarly, you can you can toggle on and off or set a percentage to control the blind louver sub-function using the Blind control mode property.

Light and Blind Control Tab

For more granular control, you can use the Light and Blind Control tab to specify the 4 supported light groups, and the blind position and angle for the 12 supported blind groups in the SpaceLogic Sensor. You can also use the Light forced disable and Blind forced disable properties as an override or a forced disable.

Light and Blind Configuration Tab

In this tab, you can enter the Default light group or Default blind group value corresponding to the Light and Blind Control tab Light 1-4 level and Blind 1-12 position properties. For example, if you select Default light group or Default blind group equals 1, you direct the Remote Control to affect the Light 1 level and the Blind 1 angle and Blind 1 position properties.

Button and Scene Configuration Tab

The Display Button and Scene Configuration property tab allows you to select from the available functions or scenes to program the buttons on the SpaceLogic Sensor display models. You can also select the buttons you wish to display for configured scenes and triggers for each of the scene buttons.

Pour plus d'informations, voir Configuring SpaceLogic Sensor Display Properties .

Property Mapping

While the Display property tabs allow you to configure varied SpaceLogic Sensor models with different UI features, not all of the properties apply to each model. Be sure to consider this when configuring the application and binding it to your control programs. The table that follows shows the properties applicable to each unit.

Table : SpaceLogic Sensor and Display Object Property Mapping

Display property	Touchscreen Display	LCD Temperature Sensor	3-Button Cover
Setpoint	Yes	Yes	Yes
Fan speed	Yes	Yes	No
Occupancy override	Yes	Yes	Yes
HVAC mode	Yes	Yes	No
Selected scene	Yes	Yes	No
Light level	Yes	Yes	No
Blind position	Yes	Yes	No
Blind slat angle	Yes	Yes	No
Temperature display mode	Yes	Yes	No
Custom temperature	Yes	Yes	No
Heating cooling status	Yes	Yes	No
Show time	Yes	No	No
Time format	Yes	No	No
Show CO2	Yes	Yes	No
Show humidity	Yes	Yes	No
Temperature units	Yes	Yes	No
Allowed fan speeds	Yes	Yes	No
Enable wall back lighting	No	No	Yes
Lighting mode	Yes	Yes	No
Blind control mode	Yes	Yes	No
Blind angle mode	Yes	Yes	No
Allowed HVAC modes	Yes	Yes	No
Allow setpoint changes	Yes	Yes	Yes
Setpoint high limit	Yes	Yes	Yes
Setpoint low limit	Yes	Yes	Yes
Allow fan speed changes	Yes	Yes	No
Allow occupancy overrides	Yes	Yes	No
Allow HVAC mode changes	Yes	Yes	No
Allow menu pages	Yes	No	No
Allow sensors information pages	Yes	No	No
Allow device information page	Yes	No	No
Allow parent information page	Yes	No	No
Allow custom information page	Yes	No	No
Allow temperature unit changes	Yes	Yes	No
Allow light control	Yes	Yes	No
Allow blind control	Yes	Yes	No
Display backlight	Yes	No	No
Button (1-12) function	Yes	Yes	No
Scene button (1-8) button	Yes	Yes	No
Scene button (1-8) trigger	Yes	Yes	No
SpaceLogic Living Space Sensor / Eco mode	Yes	Yes	Yes

Afficher plus

action_close

The SpaceLogic Sensor Display Scene Configuration page provides you with a series of icons and button identifiers to use when programming the Touchscreen Display model.

action_zoom_plus_stroke

Figure : Scene configuration page

You use the cursor to hover over the Available Icons and identify each icon by name. You can then drag and drop an icon to assign one of the Button 1-8 locations on the SpaceLogic Sensor Display Model. For example, you may optionally use the night light icon to trigger a night scene with muted lighting in Button 1 . You would then enable that icon by choosing Scene slot 1 in the Buttons and Scene Configuration properties tab. Once you do so, Button 1 always occupies the same space on the screen for a given menu screen, such as the Front menu in the Touchscreen Display model. Pour plus d'informations, voir SpaceLogic Sensor Touchscreen Display Model .

Déclaration

The Display object Button and Scene Configuration properties tab includes the same Available Icons and Scene button 1-8 IDs that display on this page. In the case of the icons, they are identified by name rather than by displaying an icon, however. Pour plus d'informations, voir SpaceLogic Sensor Display Properties - Button and Scene Configuration Tab .

Button Assignments

You not only assign Button 1-8 on the page with an icon from the available range of icons, you also assign a scene button identifier which is a number used to tell the application what the scene should do. Pour plus d'informations, voir Configuring SpaceLogic Sensor Display Scenes .

You can also configure the Front (Main) and Functions menu screens in the Touchscreen Display model. However, you cannot configure them as completely as you can here on the Scene Configuration page. While the Touchscreen Display menu screens allow you to assign a function to a button, the function includes an icon and the icon is not a separate configuration. For instance, the function is setpoint and always includes the setpoint icon.

Scene Selection

You can add scene selection to both the Front (Main) and Functions menu screens in the Touchscreen Display model. However, the Front and/or Functions menu buttons are still allocated a shortcut that points to Buttons 1-8. This shortcut displays the scene icon to which it points. In this way, the buttons on those pages become proxies for the scene you configure in the Display object Scene Configuration page. Pour plus d'informations, voir Selecting the Scenes Menu .

Consider the following example for a Front menu screen with 4 buttons:

You configure Button 1 with the Change Setpoint function, which has both an implicit function and an implicit icon.

By selecting the icon in this button, you access the setpoint page where the occupant can change the setpoint. Pour plus d'informations, voir Changing the Temperature Setpoint .
You configure Button 2 with the Scene button 3 function, which effectively references the configuration of the scene button on the Scene Configuration page.

That is, the icon shown in Button 2 of the Front menu page mirrors that of scene button 3 configuration. By pressing the icon in button 2 of the Front menu page, you trigger the scene configured in the scene button trigger (scene function).

Fonctionnalité

Produits

Comment faire pour

Spécifications

Dépannage

Référence développeurs

Comment faire pour

Turning the Lights On and Off

Property Tabs

Property Mapping

Button Assignments

Scene Selection

Fonctionnalité

Produits

Comment faire pour

Spécifications

Dépannage

Référence développeurs

Comment faire pour

Turning the Lights On and Off

Property Tabs

Property Mapping

Button Assignments

Scene Selection

Voir aussi