Concept
Zigbee Modules Memory
RP controller expansion Zigbee modules have two types of memory, flash memory and RAM.
The flash memory is used as follows:
Embedded flash memory: for boot loader, operating system, application software, and configuration storage
NOR flash memory: for default configuration storage
The RAM is used for runtime operation.
The configuration data for the Zigbee modules resides in the RP-C controller to which the devices are connected. When the RP-C controller is part of an EcoStruxure BMS, the configuration data for the controller and Zigbee modules automatically resides in the parent EcoStruxure BMS server. Any configuration changes made through the EcoStruxure Building Operation software are stored in the EcoStruxure BMS server as well as the hosted RP-C controller and its subsystem. This means there is always a backup available for restoring or replacing an RP-C controller.
Configuration changes made through a third party BACnet Operator Workstation (B-OWS) or the Commission mobile application are not automatically part of the configuration data in the EcoStruxure BMS server. You need to upload such configuration changes if you want the changes to be stored in the EcoStruxure BMS server.
Scheduled backups of the EcoStruxure BMS server can provide additional protection against application and data loss. You can also manually back up or restore an EcoStruxure BMS server to a storage location on a PC or network.
RP Controller Expansion Zigbee Modules
RP-C-EXT-ZB-DALI
RP-C-EXT-ZB-0-10V
BACnet/IP Controller - RP Models
RP-C Controllers
BACnet/IP Device Firmware Management
Free Object System Memory Utilization in BACnet Controllers and IO Modules
Application Images
BACnet Controller and IO Module Communication
Association Selection Workflow
Configure an Online BACnet/IP Controller Workflow
BACnet/IP Controller Diagnostics
Device Discovery for BACnet Controllers and IO Modules
BACnet Controller and IO Module Device Management
Automatic Time Sync for BACnet Controllers and IO Modules
BACnet Backup and Restore