Conceito
KNX Modbus Gateway LEDs
There are three LEDs on the front of the KNX Modbus gateway (RP-C-EXT-KNX) and one LED above the front. The LEDs indicate different types of status and modes.
|
Function |
Color |
|
Programming |
Red |
|
KNX |
Green/Red a |
|
Mode (Status) |
Green/Red a |
|
RTU (Modbus) |
Green/Red a |
- The indicator comprises two LEDs, green and red, in one structure. When both LEDs are switched on at the same time, the colors blend and the result is amber (orange) light.
The LEDs indicate the status of the device, the programming mode, and the status of the KNX and Modbus RTU communication on the KNX bus and RP-C Modbus (RS-485) network respectively.
Programming LED
The Programming LED indicates whether the programming mode is active for the device.
|
LED Patterns |
Condition |
Recommended Action |
|
Red, constant |
Programming mode is active |
No action required. |
|
No light |
Programming mode is not active |
No action required. |
KNX LED
The KNX LED indicates the status of the data communication on the KNX bus.
|
LED Patterns |
Condition |
Recommended Action |
|
Green, flashing |
Transmitting and receiving data (telegrams) |
No action required. |
|
No light |
No data communication |
No action required. |
Mode LED
The Mode LED indicates the status of the device.
|
LED Patterns |
Condition |
Recommended Action |
|
Green, constant |
Normal operation, status OK. |
No action required. |
|
Green, flashing |
Configuration parameters and application are currently being downloaded from ETS to the device. When the download is completed, the LED returns to constant green light. |
No action required. |
|
Amber, constant |
Manual operation mode is active. a |
No action required. |
|
Red, constant |
Programming mode is active. |
No action required. |
|
Red, flashing |
Device is not loaded correctly (for example, because an ETS download was interrupted). b |
Download application from ETS again. |
|
No light |
No power supply from the KNX bus connection. |
Check the KNX bus connection. |
- Programming mode is not active.
- Programming mode is not active. Manual operation mode is not active.
RTU LED
The RTU LED indicates the status of the Modbus RTU data communication over the RP-C Modbus (RS-485) network.
|
LED Patterns |
Condition |
Recommended Action |
|
Green, flashing |
Transmitting and receiving data |
No action required. |
|
No light |
No data communication |
No action required. |
KNX Modbus Gateway RP-C-EXT-KNX