Operator Display

SpaceLogic™ Operator Display is a touch-screen Human Machine Interface (HMI) for SpaceLogic controllers and servers, designed for local monitoring of building controllers in small and medium-sized buildings, as well as in large buildings with comprehensive building management systems. Operator Display is specifically designed for equipment rooms and it simplifies operations, service, and troubleshooting for System Integrators and Service Engineers, as well as for non-technical users (notably Facility Managers and Janitors).

The simplified user interface and the intuitive touch-screen navigation make it easy to operate and maintain the system. Operator Display communicates quickly over BACnet/IP open protocol with a direct connection to SpaceLogic MP or RP controllers, IP-IO modules, AS-B or AS-P servers. Only one Operator Display is required per cabinet in the equipment room, so there is no need for more displays when a controller is added (up to seven controllers). The operator can view and acknowledge alarms, edit schedules, and adjust setpoint temperatures. Authorized operators can also view and override inputs, outputs, and other virtual points.

Operator Display has a status LED, a battery slot, a hook, Ethernet ports, serial interface ports, a power plug connector, and USB ports.

There are specific security hardening recommendations to follow when installing Operator Display.

Especificaciones

DC input
Nominal voltage	24 VDC
Operating voltage range	+/- 20 %
Inrush current	30 A or less
Maximum power consumption	9 W
Immunity to microbreaks	5 ms
Environment
Physical environment
Ambient temperature, operating	0 to 50 °C (32 to 122 °F)
Ambient temperature, storage	-20 to +60 °C (-4 to +140 °F)
Humidity	10 to 90 % RH non-condensing
Pollution degree	2
Operating altitude	800 to 1,114 hPa (2,000 m (6,561 ft) or lower)
Mechanical environment
Vibration resistance	IEC/BS/EN 61131-2 compliant
	5 to 9 Hz Single amplitude 3.5 mm (0.14 in)
	9 to 150 Hz Fixed acceleration: 9.8 m/s ²
	X, Y, Z directions for 10 cycles (approximately 100 minutes)
Shock resistance	IEC/BS/EN 61131-2 compliant: 147 m/s ² , X, Y, Z directions for 3 times
Electrical environment
Electrical fast transient/burst	IEC/BS/EN 61000-4-4, 2 kV: Power port (display unit), 1 kV: Signal ports
Electrostatic discharge immunity	IEC/BS/EN 61000-4-2 Level 3, Contact discharge method: 6 kV, Air discharge method: 8 kV
Material
Enclosure	Polycarbonate (PC)
Front	Aluminum
Display	Polyethylene Terephthalate (PET)
Ingress protection rating	IP 65 (front of product that is exposed, on panel-mounted installation)
NEMA rating	NEMA 4 (front, indoor use)
	NEMA 13 (front, in enclosure)
Plastic flame rating	UL94 V-0
Mechanical
Dimensions (W x H x D)	208 x 153 x 45 mm (8.19 x 6.02 x 1.77 in.)
See drawing below:
action_zoom_plus_stroke
Weight	0.8 kg (1.8 lb)
Installation	Mounted to the panel using 4 screws (included), conforming to UL 61010-1, CSA C22.2 No 61010-1, UL 61010-2-201, CSA C22.2 No 61010-2-201 (1.6 to 5 mm (0.1 to 0.2 in) thick panel), BS/EN 61131-2, and BS/EN 61000-6-2
Real-time clock
Power	Battery (CR2032)
Accuracy	+/- 20 ppm
Battery lifetime	5 years at room temperature ^a
a) The lifetime of the battery may vary depending on different applications and environments.
Communication ports
Ethernet	Dual 10/100BASE-TX (RJ45) ^a
a) Only one port is used; the second one is inactive.
USB	1 USB 2.0 host port (type-A), 5 VDC, 2.5 W
	1 USB 2.0 device port (micro-B)
RS-232C	1 COM1 (D-Sub, 9-pin, female) - Inactive
RS-485	1 COM2 (RJ45, female) - Inactive
Hardware
CPU type	ARM Cortex-A8 single-core
Frequency	800 MHz
Device memory (NAND Flash)	1 GB (including 180 MB for user data)
Backup memory (MRAM)	512 KB
Status indicator	LED (green, orange, and red)
	Buzzer (not used)
Display
Display resolution	800 x 480 pixels (WVGA)
Display aspect ratio	16:10
Display size	7 inches (178 mm)
Display type	TFT LCD, touchscreen
	Single touch analog resistive panel
Color	16 million colors
Display languages	Czech, Danish, English, Finnish, French, German, Italian, Norwegian, Polish, Portuguese, Russian, Slovak, Spanish, Swedish
Brightness control	400 cd/m ²
	16 levels
LED lifetime ^a	50,000 hours
a) The LED lifetime is defined as the time when the LED continues to operate at the ambient temperature 25 °C +/-2 °C (77 °F +/- 3.6 °F) until the brightness is reduced to 25% of its original value.

Funcionalidad

Productos

Explicación de procesos

Especificaciones

Soluciones

Ref. desarrolladores

Concepto

Operator Display