Concept
RP-V Models
The RP-V controller is available in two models that support both BACnet/IP and MS/TP communication. These two models offer two different combinations (sets) of the number of I/O points and types of I/O points. The RP-V controller also comes in a model that only supports BACnet MS/TP communication.
|
Range |
Model |
BACnet |
I/O Set |
I/O Points |
|
SpaceLogic RP-V Advanced |
RP-V-4A |
IP or MS/TP a |
4A |
4 |
|
SpaceLogic RP-V Advanced |
RP-V-5A |
IP or MS/TP a |
5A |
5 |
|
EasyLogic RP-V |
RP-V-5C-M |
MS/TP |
5C |
5 |
- Adapter required: Isolated RS-485 Adapter (SXWISORS48510001), Non-isolated RS-485 Adapter (SXWNISORS48510001), or RS-485 Power Adapter (SXWNISORS485P10001).
Pour plus d'informations, voir RP-V Onboard I/O .
The RP-V controllers have the same compact design and approximately the same dimensions as the MP-V controllers and a majority of the Schneider Electric VAV controller models from Andover Continuum, TAC Vista, and TAC I/A Series product lines. You can use the RP-V controllers for both cooling and heating applications.
The EasyLogic RP-V model differs significantly from the SpaceLogic RP-V models not only in terms of the supported BACnet communication protocol(s), but also with regards to the set of communication ports and several other features.
The EasyLogic models have an “-M” in the product name.
|
Feature |
RP-V-4A, RP-V-5A |
RP-V-5C-M |
|
Built-in wireless connectivity |
yes |
no a |
|
Ethernet ports |
2 |
0 |
|
USB ports |
1 b |
0 |
|
RS-485 ports with RJ45 interface |
2 (Com A, Com B) c |
1 (Com A) d |
|
RS-485 ports supporting Isolated RS-485 Adapter e |
Com B |
- |
|
RS-485 ports supporting Non-isolated RS-485 Adapter or RS-485 Power Adapter f |
Com A, Com B |
Com A |
|
RS-485 port with screw terminals |
0 |
1 g |
|
I/O and power input terminals/connectors |
Fixed screw terminals |
Fixed screw terminals |
|
MS/TP address configuration |
Software |
DIP switch |
|
Room bus support |
yes |
no |
|
Sensor bus support |
yes |
yes h |
|
Modbus support |
yes i |
yes h j |
|
RTD sensor support |
yes |
no |
|
LED(s) |
1 k |
1 k |
|
Real-time clock |
yes |
no |
|
Input power |
24 VAC |
24 VAC |
|
Power input type |
Isolated |
Isolated |
|
CPU type |
Single-core |
Single-core |
|
Memory (RAM / NOR flash / FRAM) |
6 MB / 48 MB / 128 kB |
6 MB / 32 MB / 128 kB l |
- The SpaceLogic Bluetooth Adapter (SXWBTAECXX10001) can be used to add wireless connnectivity to the controller. The adapter is connected to a SpaceLogic Sensor on the Sensor Bus.
- USB Host port.
- Load: max. 3 W per port, max. 4 W total load.
- Load: max. 3 W.
- Isolated RS-485 Adapter (SXWISORS48510001) can be used for converting the RS-485 port with RJ45 interface to screw terminals.
- Non-isolated RS-485 Adapter (SXWNISORS48510001) and RS-485 Power Adapter (SXWNISORS485P10001) can be used for converting the RS-485 port with RJ45 interface to screw terminals. RS-485 Power Adapter (SXWNISORS485P10001) can also be used for power injecton on Room Bus or Sensor Bus.
- Dedicated for BACnet MS/TP bus. Removable 3-pole screw terminal block.
- The RS-485 Com A port can be configured for either Sensor Bus or Modbus.
- Either the RS-485 Com A port (Sensor Bus) or RS-485 Com B port (Room Bus) can be reconfigured for Modbus.
- The KNX Modbus Gateway (RP-C-EXT-KNX) is not supported.
- Status LED.
- RP-V-5C-M with hardware version earlier than 05 has a FRAM memory with a size of 8 kB. For these hardware versions, the use of Script programs is recommended to save FRAM memory space.
Hardware Overview
RP-V Controllers
RP-V Onboard I/O