Concepto
RP-C-16B-F-230V Screw Terminals
The RP-C-16B-F-230V model has 16 I/O points and the controller is equipped with 30 fixed screw terminals.
Peligro
|
|---|
|
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Disconnect the power supply and other high voltage equipment before wiring. Failure to follow these instructions will result in death or serious injury. |
|
Peligro
|
|---|
|
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Never connect the 24 VAC supply output terminals 4 and 5 to any other power supply output, regardless of polarity. Failure to follow these instructions will result in death or serious injury. |
Recommended screw tightening torque: 0.56 to 0.79 Nm (5 to 7 lbf.in)
The 30 screw terminals are used as follows:
Two screw terminals for the power input
One screw terminal for protective earth ground
Two screw terminals for the 24 VAC output terminals 4 and 5
Six screw terminals for the four solid-state relay (SSR) outputs
Four screw terminals for the three relay outputs
Three screw terminals for the high power relay output
12 screw terminals for the eight universal inputs/outputs of type Ub
|
Terminal number |
Designation |
Usage |
|
Power input |
|
|
|
1 |
L |
Line (L) lead, 230 VAC, 50/60 Hz, 65 VA |
|
2 |
N |
Neutral (N) lead, 230 VAC, 50/60 Hz, 65 VA |
|
3 |
|
Protective earth ground |
|
24 VAC output |
|
|
|
4 |
24 VAC Out |
24 VAC, 19 VA, isolated output Para obtener más información, consulte 24 VAC Output on RP-C 230 V Controller Models . |
|
5 |
24 VAC Out |
24 VAC, 19 VA, isolated output Para obtener más información, consulte 24 VAC Output on RP-C 230 V Controller Models . |
|
Solid-state relay (SSR) outputs |
|
|
|
6 |
DO1 |
SSR output |
|
7 |
COM1 |
Common connection for DO1 and DO2 The COM terminal can be connected to 0 to 24 VAC or -30 VDC to +30 VDC. |
|
8 |
DO2 |
SSR output |
|
9 |
DO3 |
SSR output |
|
10 |
COM2 |
Common connection for DO3 and DO4 The COM terminal can be connected to 0 to 24 VAC or -30 VDC to +30 VDC. |
|
11 |
DO4 |
SSR output |
|
Relay outputs |
|
|
|
12 |
COM3 |
Common connection for DO1, DO2, and DO3 |
|
13 |
DO1 |
Relay output, type Form A |
|
14 |
DO2 |
Relay output, type Form A |
|
15 |
DO3 |
Relay output, type Form A |
|
High power relay outputs |
|
|
|
16 |
NC |
Normally Closed terminal. High power relay output, type Form C. |
|
17 |
DO4 |
Common terminal. High power relay output, type Form C. |
|
18 |
NO |
Normally Open terminal. High power relay output, type Form C. |
|
Universal inputs/outputs |
|
|
|
19 |
Ub1 |
Universal input/output, type Ub |
|
20 |
RET |
Internally connected to all RET terminals |
|
21 |
Ub2 |
Universal input/output, type Ub |
|
22 |
Ub3 |
Universal input/output, type Ub |
|
23 |
RET |
Internally connected to all RET terminals |
|
24 |
Ub4 |
Universal input/output, type Ub |
|
25 |
Ub5 |
Universal input/output, type Ub |
|
26 |
RET |
Internally connected to all RET terminals |
|
27 |
Ub6 |
Universal input/output, type Ub |
|
28 |
Ub7 |
Universal input/output, type Ub |
|
29 |
RET |
Internally connected to all RET terminals |
|
30 |
Ub8 |
Universal input/output, type Ub |
RP-C Controllers
RP-C Screw Terminals
Wiring
24 VAC Output on RP-C 230 V Controller Models