Installation de matériel
SpaceLogic™ RS-485 Power Adapter
Safety Information
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
Carefully read these instructions and all information relevant for this product before trying to install it. See the list of technical literature.
Technical Literature
SpaceLogic and EasyLogic - Hardware Reference Guide, 04-XX001-XX-en
The technical literature and declarations of conformity can be accessed on the Schneider Electric extranet, ecoxpert.se.com. Contact your local Schneider Electric sales office for a hard copy of the documentation or for additional information.
Connecting the Adapter to an External 24 VDC Supply for RS-485 Bus Extension for a Controller
Wiring
Recommended screw tightening torque: 0.5 Nm (4.5 lbf.in)
For information on wiring, see the SpaceLogic and EasyLogic - Hardware Reference Guide.
Spécifications
| Required external power supply ratings | |
Output
|
Regulated 24 VDC
|
Isolated (non-grounded) terminals
|
|
Safety class
|
IEC protection class II
|
Output power
|
Minimum 3 W (125 mA)
|
Maximum 100 W or 100 VA
|
|
Maximum out port bus load
|
3 W
|
| Hardware | |
Connectors
|
RS-485, 4-pole screw terminal block
|
RS-485, dual RJ45 ports
|
|
Switch
|
2-pole slide switch
|
| Operation environment | |
Ambient temperature, operating
|
0 to 50 °C (32 to 122 °F)
|
Indoor use only
|
|
Humidity
|
Maximum 95 % RH non-condensing
|
| Mechanical | |
Weight
|
24 g (0.84 oz)
|
Ingress protection rating
|
IP 20
|
Plastic flame rating
|
UL94 V-0
|
Plenum rating
|
UL 2043 (Approved for plenum installations)
|
Addendum - California Proposition 65 Warning Statement for California Residents
