Concepto
RP-IO Module LED
There is one LED on the front panel of the RP-IO module.
|
Function |
Color |
|
Status |
Red, Green, Blue (and combinations) |
Status LED
The RP-IO module Status LED indicates the condition of the device.
|
LED Patterns |
Condition |
|
Green, constant |
Normal operation, status OK RP-IO module firmware application running |
|
Green 3 seconds, blue 1 second |
Normal operation, status OK RP-IO module firmware application running |
|
Green, flashing (~1 Hz) |
Device restarting, wait RP-IO module firmware application running |
|
Red, constant |
Detected error, attention required |
|
Red, flashing (~1 Hz) |
Device operates, but a problem needs attention |
|
Red/green, flashing (~1 Hz) |
RP I/O board receiving software upgrade, wait Do not interrupt power to the controller. For more information, see the following Important note. |
|
Amber, constant |
RP-IO module firmware boot applet running |
|
Amber, flash |
Device restarting, wait RP-IO module firmware boot applet started |
|
Amber/green, flashing (~1 Hz) |
RP-IO module firmware is being upgraded. It is typically the firmware main application, but it can also be a boot applet. |
|
White, transient |
Device starting, wait |
|
White, constant |
RP-IO module firmware not running, attention required (contact product support) |
Avoid power interruptions to the device during the brief period when the Status LED is flashing red and green. An interruption causes problems with the I/O processor upgrade and can result in corrupt firmware. You can view the evidence of a corrupt processor when the device reports itself as an “MP-C-15A.” A corrupt I/O processor can lead to the loss of the reset button and/or I/O functionality, as well as the inability to upgrade the I/O processor and/or the device.
RP-IO Modules
RP-IO Models
Status LEDs