Create Change of State Alarm Wizard

Component	Description
True	Select to trigger the alarm when the monitored variable is equal to true.
False	Select to trigger the alarm when the monitored variable is equal to false.
Monitored variable	Enter the path to the variable that is monitored by the alarm.
Disable alarm	Select to disable the alarm, for example, before deployment.
Alarm delay	Enter the time, in seconds, the alarm has to be within the reset criteria before the alarm state is changed from alarm to reset.
Reset delay	Enter the time, in seconds, the alarm has to be within the alarm criteria before the alarm is triggered.
Shunt variable 1	Enter the shunt variable that is used to enable or disable the alarm. Pour plus d'informations, voir Shunt Variables .
Invert	Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Pour plus d'informations, voir Shunt Variables .
Operator	Select AND or OR to add logic between the first and the second shunt variable. Pour plus d'informations, voir Shunt Variables .
Shunt variable 2	Enter the second shunt variable that is used to enable or disable the alarm. Pour plus d'informations, voir Shunt Variables .
Invert	Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Pour plus d'informations, voir Shunt Variables .

Component

Description

True

Select to trigger the alarm when the monitored variable is equal to true.

False

Select to trigger the alarm when the monitored variable is equal to false.

Monitored variable

Enter the path to the variable that is monitored by the alarm.

Disable alarm

Select to disable the alarm, for example, before deployment.

Alarm delay

Enter the time, in seconds, the alarm has to be within the reset criteria before the alarm state is changed from alarm to reset.

Reset delay

Enter the time, in seconds, the alarm has to be within the alarm criteria before the alarm is triggered.

Shunt variable 1

Enter the shunt variable that is used to enable or disable the alarm. Pour plus d'informations, voir Shunt Variables .

Invert

Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Pour plus d'informations, voir Shunt Variables .

Operator

Select AND or OR to add logic between the first and the second shunt variable. Pour plus d'informations, voir Shunt Variables .

Shunt variable 2

Enter the second shunt variable that is used to enable or disable the alarm. Pour plus d'informations, voir Shunt Variables .

Invert

Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Pour plus d'informations, voir Shunt Variables .

Fonctionnalité

Produits

Comment faire pour

Spécifications

Dépannage

Référence développeurs

Interface utilisateur

Create Change of State Alarm Wizard – Alarm Trigger Page