Ratgeber
Connecting Advanced Display to a Power Adapter
You connect Advanced Display to a USB power adapter in order to supply Advanced Display with power and to ensure that its battery is charged.
AD v2 uses a wired (USB) connection to communicate with EcoStruxure BMS servers. During installation and commissioning, you can use a wireless access point to establish communication between AD v2 and EcoStruxure BMS servers. AD v2 can be powered either by a AS-P server, AS-B server, or USB power adapter.
Communication over a USB Connection
The preinstalled AD-Link application enables AD v2 to communicate with EcoStruxure BMS servers over a USB connection.
When AD v2 is connected to a AS-P server or AS-B server, AD v2 can be powered by the automation server through the USB cable. The screen must not be turned on constantly because this may drain the battery.
Warnung
|
|---|
|
HAZARD OF EXPLOSION OR DEVICE DAMAGE Use only Samsung-approved power adapters. Failure to follow these instructions can result in death, serious injury, or equipment damage. |
Insert the USB cable from Advanced Display into the power adapter.
Plug the power adapter into the standard AC power outlet.
You can now turn on Advanced Display.
AD v2 Communication and Power
AD v1 Communication and Power
Installing the AD v2 Tablet and Frame
Installing the AD v1 Tablet and Frame
AD v1 or AD v2 Does Not Turn On or Battery Does Not Charge