Ratgeber
Changing the Time Zone of a SmartStruxure Server
You change the time zone of a SmartStruxure server to adjust the UTC offset according to the region where the SmartStruxure server is located.
The Enterprise Server time and date settings are configured through the operating system settings on which the Enterprise Server is installed. The time zone offset, configured through the Enterprise Server, is added by Building Operation to the UTC time. The Enterprise Server time zone settings are therefore independent of the operating system time zone settings.
To adjust your operating system clock, refer to your manufacturer’s manual for the operating system. The Enterprise Server time zone is configured on the Enterprise Server through WorkStation
The Date and Time synchronization for Automation Server do not affect the Enterprise Server clock. Für weitere Informationen siehe Synchronize Network Time Settings .
In WorkStation, on the Tools menu, click Control Panel .
On the Control Panel toolbar, select the SmartStruxure server.
action_zoom_plus_stroke 
Click Network time and time zones .
Select Predefined time zone and then select the time zone the SmartStruxure server is located in.
action_zoom_plus_stroke 
On the File menu, click Save .
If your time zone is not listed, you can create and configure a custom time zone.
Creating a Custom Time Zone of a SmartStruxure Server
Synchronizing Time Zone Settings on Multiple SmartStruxure Server Devices
Time and Time Zone Configuration in Enterprise Server
Enterprise Server – Date & Time View