Como
Configuring a Change of Value Trend Log
You configure the properties of a change of value trend log to meet the unique needs of your site.
The change of value trend log records the variable each time the difference between the current value and the last log value exceeds the delta. Use the change of value trend log to, for example, record a variable that has an unequal oscillation.
The change of value trend log is limited to 10 records per second.
Do not set the delta too small since this can quickly fill up the trend log.
For example, in the figure below, the change of value trend log records a variable every time the variable exceeds or falls below the delta of 3. The records are printed in a trend chart. Notice that the change of value trend log records the values without any time perspective between the records.
The change of value trend log, which is not a variable triggered trend log, has the function to start log records according to a given start condition. Para mais informações, consulte Trend Log Activation .
You can configure the maximum log interval in a change of value trend log. The maximum log interval is the maximum time that can elapse between two recordings regardless of whether the value has changed or not. The maximum log interval is calculated from the last actual recording. When the maximum log interval is configured, it bypasses the delta and the recording is triggered when the configured time period has elapsed.
A change of value trend log can be created with initial meter settings . The change of value trend log supports the meter change command and meter consumption calculation. You can view the last meter change information on the change of value trend log object. Para mais informações, consulte Meter Function .
In WorkStation, in the System Tree pane, select the change of value trend log you want to configure.
On the File menu, click Properties .
In the properties dialog box, click the Basic tab.
Edit the basic properties:
Tabela: Change of Value Trend Log Properties - Basic Tab
Property
Description
Status
Displays the status of the trend log.
Enabled
Displays True if the trend log is enabled.
Logged variable
Enter the variable that you want to log.
Delta
Select the minimum value change that triggers a new record.
Activation variable
Enter the variable that makes the trend log start recording values when the variable is True .
Para mais informações, consulte Trend Log Activation .
Activation time
Specify the time when the trend log is to start recording values.
Para mais informações, consulte Trend Log Activation .
Maximum log interval
Select the maximum time that can pass between two recordings regardless if the delta value has been exceeded or not.
Log size
Select the number of records to store before old records are overwritten, including internal records generated by the trend log.
Para mais informações, consulte Log Record Storage .
Clear when enabled
Select True to clear the trend log when it is enabled.
Click the Meter Info tab.
Edit the meter properties:
Tabela: Meter Info Tab
Property
Description
Is meter log
Select True if the trend log meter function is active.
Para mais informações, consulte Meter Function .
Meter change time
Enter the time when the meter was changed.
Meter change user
Enter the name of the user account that changed the meter.
End time
Enter the time when the old meter was replaced.
End value
Enter the value the old meter had when it was replaced.
Start time
Enter the time when the new meter was installed.
Start value
Enter the value of the new meter when it was installed.
Meter constant
Enter the constant of the new meter. If the meter counts in kilo (10 3 ), the constant is 1000.
Min value
Enter the first value of the new meter after roll-over.
Max value
Enter the last value of the new meter before roll-over.
Click OK .
Change of Value Trend Logs
Change of Value Trend Log Properties – Basic Tab
Configure Dialog Box – Configuration Tab
Trend Log Activation
Configure Dialog Box – Operation Tab
Log Record Storage
Meter Function
Trend Log Does Not Start Record Due to the Start Condition
Missing Trend Log Records