You change the PIN of the SpaceLogic Bluetooth Adapter for best security practices. The Bluetooth Adapter PIN is engineered to a default code of 333666 and should be changed to a secure code before you perform device commissioning. You configure the password for Bluetooth access in the RP controller.
Connect to the Adapter. For more information, see Connecting to a Controller through Bluetooth .
In the Bluetooth Device Management page, in the PIN field, type the new PIN and select Update .
Your mobile device or Windows 10 laptop prompts you to unpair from the Adapter. Select Allow .
The Commission mobile application returns to the Bluetooth Devices page. On the Adapter, push the LED button to initiate pairing.
In the Commission mobile application, select the Adapter and select Connect .
In the Bluetooth Device Management page, select Discover Device .
Your mobile device or Windows 10 laptop prompts you for the Adapter PIN. Enter the new PIN and select Allow .
Your mobile device or Windows 10 laptop indicates the pairing was successful. Select Close .
Be sure to enable the Sensor bus property on the RP controller Settings object. Otherwise, the Bluetooth adapter will not operate. For more information, see BACnet/IP Controller Settings Properties – Basic Tab .
You have successfully changed the Adapter PIN and can connect to a controller.