Modalità
Installing the AD v1 Base on a Wall
You install the AD v1 protective frame with its base on a wall to use AD v1 for accessing the SmartStruxure servers. You attach the base on the wall and to the electrical box using the dedicated holes and hole patterns in the base.
The frame and its base do not provide protection against theft.
AD v1 provides a Human Machine Interface (HMI) for local access to SmartStruxure servers.
AD v1 is based on an Android platform with a high-resolution touchscreen display. The display size is 10 inches.
Stationary HMI Terminal
AD v1 is intended to be used as a stationary HMI terminal. For example, AD v1 can be installed on a control cabinet in a plant room or it can be installed on a wall in a hospital.
Kiosk Mode
AD v1 is preinstalled with SmartXKiosk, which allows you to lock AD v1 into Kiosk mode to prevent users from accessing other apps than the one you have downloaded and selected. Per maggior informazioni, consulta SmartXKiosk Overview .
AD v1 Bundle
AD v1 is delivered in a bundle, which contains a protective frame. When assembled, the frame protects against dust, moisture, and mechanical damage. The USB cable is ordered separately from Schneider Electric.
The frame and its base do not provide protection against theft.
Installation Options
The protective frame has a base, which is equipped with hole mount patterns to support a variety of installation options. For example, AD v1 can be installed on a control cabinet, on a wall, or on a VESA stand that fits devices with a 100 x 100 mm (3.94 x 3.94 in.) hole pattern.
AD v1 Communication and Power
AD v1 can use either a wired (USB) connection or a wireless (WiFi) connection to communicate with SmartStruxure servers. AD v1 can be powered either by an AS-P, AS-B, or USB power adapter, but not by an Automation Server.
Per maggior informazioni, consulta AD v1 Communication and Power .
Preinstalled Apps
AD v1 is delivered with the following set of preinstalled apps:
SmartXKiosk for locking AD v1 into Kiosk mode
SmartX AD-Link for enabling IP over USB communication
Per maggior informazioni, consulta SmartX AD-Link Overview .
Technician Tool for operation and maintenance of SmartStruxure servers
Per maggior informazioni, consulta Technician Tool Overview .
Specifiche
| Electrical | |
DC input current consumption
|
500 mA to 1.3 A
|
DC input supply voltage
|
5 VDC (USB)
|
| Environment | |
Ambient temperature, operating
|
5 to 35 °C (41 to 95 °F)
|
| Material | |
Enclosure
|
UV stable ABS
|
Enclosure rating
|
IP 54
|
Plastic rating
|
UL94-HB
|
| Mechanical | |
Dimensions (W x H x D)
|
266 x 203 x 19 mm (10.5 x 8.0 x 0.75 in.)
|
|
|
Weight
|
0.656 kg (1.446 lb)
|
| Communications | |
USB
|
1 USB 2.0 port
|
WiFi
|
802.11 a/b/g/n 2.4 + 5 GHz
|
| CPU | |
Frequency
|
1.2 GHz
|
Type
|
Quad-core
|
Internal memory
|
1.5 GB RAM, 16 GB ROM
|
| Operating system | |
Supported versions
|
Android 4.4 to 4.4.4 (KitKat)
|
Android 4.4W to 4.4W.2 (KitKat)
|
|
Android 5.0 to 5.1 (Lollipop)
|
|
| Display | |
Display resolution
|
1280 x 800 pixels
|
Display size
|
10.1 inches (256 mm)
|
Display type
|
TFT LCD, touchscreen
|
Hold the base against the wall and adjust its position so that the hole pattern around the center hole of the base fits the hole pattern of the electrical box.
Mark the place where the four drill holes should be on the wall.
AvvisoUse the holes in the corners of the base to mark the place where the drill holes should be.
Drill the four holes in the wall for attachment of the base on the wall.
Fasten the base to the electrical box.
Fasten the base on the wall using four screws.
action_zoom_plus_stroke 
You can now continue by installing the tablet in the frame.
AD v1
Installing the AD v1 Base on a Cabinet
Installing the AD v1 Tablet and Frame