Create Multistate Alarm Wizard – Alarm Trigger Page

Component	Description
action_zoom_plus_stroke	Add row Click to add another alarm condition that triggers the alarm.
action_zoom_plus_stroke	Remove row Click to remove an alarm condition.
between	Select a range. If the monitored variable is within this range, the alarm is triggered.
equal to	Select a value. If the monitored variable is equal to this value, the alarm is triggered.
Monitored variable	Enter the path to the variable that is monitored by the alarm.
Disable alarm	Displays the present state of the alarm. Para mais informações, consulte Alarm States .
Alarm delay	Enter the time, in seconds, the alarm has to be within the alarm criteria before the alarm is triggered.
Reset delay	Enter the time, in seconds, the alarm has to be within the reset criteria before the alarm state is changed from alarm to reset.
Shunt variable 1	Enter the shunt variable that is used to enable or disable the alarm. Para mais informações, consulte Shunt Variables .
Invert	Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Para mais informações, consulte Shunt Variables .
Operator	Select AND or OR to add logic between the first and the second shunt variable. Para mais informações, consulte Shunt Variables .
Shunt variable 2	Enter the second shunt variable that is used to enable or disable the alarm. Para mais informações, consulte Shunt Variables .
Invert	Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Para mais informações, consulte Shunt Variables .
action_zoom_plus_stroke	Set u nit Enter the unit of the alarm.

Component

Description

action_zoom_plus_stroke

Add row

Click to add another alarm condition that triggers the alarm.

action_zoom_plus_stroke

Remove row

Click to remove an alarm condition.

between

Select a range. If the monitored variable is within this range, the alarm is triggered.

equal to

Select a value. If the monitored variable is equal to this value, the alarm is triggered.

Monitored variable

Enter the path to the variable that is monitored by the alarm.

Disable alarm

Displays the present state of the alarm. Para mais informações, consulte Alarm States .

Alarm delay

Enter the time, in seconds, the alarm has to be within the alarm criteria before the alarm is triggered.

Reset delay

Enter the time, in seconds, the alarm has to be within the reset criteria before the alarm state is changed from alarm to reset.

Shunt variable 1

Enter the shunt variable that is used to enable or disable the alarm. Para mais informações, consulte Shunt Variables .

Invert

Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Para mais informações, consulte Shunt Variables .

Operator

Select AND or OR to add logic between the first and the second shunt variable. Para mais informações, consulte Shunt Variables .

Shunt variable 2

Enter the second shunt variable that is used to enable or disable the alarm. Para mais informações, consulte Shunt Variables .

Invert

Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Para mais informações, consulte Shunt Variables .

action_zoom_plus_stroke

Set u nit

Enter the unit of the alarm.

Funcionalidade

Produtos

Como

Especificações

Resolução de problemas

Referência de programadores

Interface de utilizador

Create Multistate Alarm Wizard – Alarm Trigger Page

Funcionalidade

Produtos

Como

Especificações

Resolução de problemas

Referência de programadores

Interface de utilizador

Create Multistate Alarm Wizard – Alarm Trigger Page

Ver também