Use the trend log list event icons to get information on different trend log events.
Icon |
Description |
|
Log was started Indicates that the trend log started recording values. |
|
Log was stopped Indicates that the trend log stopped recording values. |
|
The log is not configured Indicates that the trend log is not correctly configured or preferences are missing, so the trend log cannot start recording values. |
|
A log value was missed Indicates that one or more records were missed due to interrupted communication, hardware failure, or software failure. |
|
The log configuration was updated Indicates that the settings of the trend log were updated. The change is described in the comment column of the table. |
|
Record was added Indicates that a record was manually added. |
|
Record was edited Indicates that a record was manually edited. |
|
Record was commented Indicates that a log record was commented. The comment is displayed in the ToolTip of the event and in the comment column of the table. |
|
Log was cleared Indicates that a trend log was cleared. |
|
Meter was changed Indicates that the meter was changed or that the settings were configured. This event symbol only applies to the meter trend log. |
|
System clock changed Indicates that the system date or time, where the trend log is located, has been changed. Pour plus d'informations, voir Time and Time Zone . |
|
Override Indicates that the recorded value is overridden by the hardware and is not the measured value. Pour plus d'informations, voir Output Override Status . Forced Indicates that the recorded value is forced by the software and is not the measured value. Pour plus d'informations, voir Forced I/O Point Values . |
|
Log database restored Indicates that the log database has been restored and that, when the log restarts, there can be a time gap in the log series. |
|
Log reset by extended log Indicates that the commands from the extended trend log have been cleared from the trend log. |