Interface utilisateur
Create Variable Status Alarm Wizard – Alarm Trigger Page
Use the Alarm Trigger page to configure the trigger settings of the variable status alarm.
|
Component |
Description |
|
Forced |
Select to trigger the alarm when the monitored variable status is forced. Pour plus d'informations, voir Boutons Forcer et Déforcer . |
|
Overridden |
Select to trigger the alarm when the monitored variable status is overridden. Pour plus d'informations, voir Output Override Status . |
|
Monitored variable |
Enter the path to the variable that is monitored by the alarm. |
|
Disable alarm |
Select to disable the alarm, for example, before deployment. |
|
Alarm delay |
Enter the time, in seconds, the alarm has to be within the reset criteria before the alarm state is changed from alarm to reset. |
|
Reset delay |
Enter the time, in seconds, the alarm has to be within the alarm criteria before the alarm is triggered. |
|
Shunt variable 1 |
Enter the shunt variable that is used to enable or disable the alarm. Pour plus d'informations, voir Shunt Variables . |
|
Invert |
Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Pour plus d'informations, voir Shunt Variables . |
|
Operator |
Select AND or OR to add logic between the first and the second shunt variable. Pour plus d'informations, voir Shunt Variables . |
|
Shunt variable 2 |
Enter the second shunt variable that is used to enable or disable the alarm. Pour plus d'informations, voir Shunt Variables . |
|
Invert |
Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Pour plus d'informations, voir Shunt Variables . |
Create Alarm Wizard – Presentation Page
Create Alarm Wizard – User Action Page
Create Alarm Wizard – Attachment Page
Variable Status Alarm Properties – Basic Tab
Create Object Dialog – Naming the Object Page
Variable Status Alarms