Explicación de procesos
Attaching a WebReports Database
You attach a WebReports database to set up the database in the computer where you want to install the next version of WebReports.
Use this workflow to upgrade an Enterprise Server system. An Enterprise Server system can include an Enterprise Server, one or more SmartStruxure server devices and WorkStations, and supporting administrator software, such as Device Administrator.
The workflow applies to upgrading a system from version 1.5, 1.6, 1.7, or 1.8 to version 1.9.
Prepare LonWorks Systems Running Version 1.5, 1.6, or 1.7
The following flowchart shows the tasks for preparing LonWorks configurations in all SmartStruxure server devices running version 1.5.x, 1.6.x, or 1.7.x for a version 1.9.x upgrade. Related information can be found in the sections after the flowchart.
If you upgrade from version 1.5.x to version 1.9.x, install the following WorkStation hotfix: SE.SBO.WorkStation-1.5.0.171xx-Hotfix.exe .
If you upgrade from version 1.6.x to version 1.9.x, install the following WorkStation hotfix: SE.SBO.WorkStation-1.6.2.12xx-Hotfix.exe .
If you upgrade from version 1.7.x to version 1.9.x, install the following WorkStation hotfix: SE.SBO.WorkStation-1.7.2.111xx-Hotfix.exe .
The command for preparing LonWorks configurations for upgrade may also be included in WorkStation hotfixes from later Consolidation Points.
In WorkStation, select the Enterprise Server and prepare the LonWorks configurations in the Enterprise Server and all online SmartStruxure server devices running version 1.5.x, 1.6.x, or 1.7.x for a version 1.9.x upgrade.
Para obtener más información, consulte Preparing LonWorks Configurations for Upgrade .
The preparation must be performed on all version 1.5, 1.6, and 1.7 SmartStruxure servers containing LonWorks configurations to be able to upgrade to version 1.9.
If any preparation on a SmartStruxure server fails, a preparation can be done locally on the SmartStruxure server before upgrade to version 1.9.
Repair LonWorks Systems Running Version 1.8
The following flowchart shows the tasks for repairing LonWorks configurations in all SmartStruxure servers running version 1.8.1. The SmartStruxure servers need to be repaired before the upgrade from version 1.8.1 to version 1.9.x. Related information can be found in the sections after the flowchart.
If you upgrade a system with LonWorks devices from version 1.8.1 to version 1.9.x, install the following WorkStation hotfix: SE.SBO.WorkStation-1.8.1.23xxx-Hotfix.exe .
If you upgrade a system with LonWorks devices from version 1.8.1 to version 1.9.x, install the following Enterprise Server hotfix: SE.SBO.Enterprise.Server-1.8.1.23xxx-Hotfix.exe .
If you upgrade a system with LonWorks devices from version 1.8.1 to version 1.9.x, install the following SmartStruxure server device hotfix: SE.SBO.Device.Administrator-1.8.1.23xxx-Hotfix.exe .
Install the hotfix on all SmartStruxure server devices hosting LonWorks devices that are based on the LonWorks imported device templates (.XIF) or resource kits (.DRF). If you are uncertain, install the hotfix on all SmartStruxure server devices hosting LonWorks devices.
In WorkStation, select the Enterprise Server and repair the LonWorks configurations in the Enterprise Server and all online SmartStruxure servers running version 1.8.1.23xxx.
Ensure you have installed the 1.8.1.23xxx hotfixes for WorkStation and the SmartStruxure servers before you repair the LonWorks configurations. WorkStation and the SmartStruxure servers must be running version 1.8.1.23xxx.
Para obtener más información, consulte Repairing LonWorks Configurations in SmartStruxure Servers Running Version 1.8.1 Before Upgrade .
You cannot upgrade to version 1.9.x until the LonWorks configurations in all SmartStruxure servers running version 1.8.1.23xxx are repaired.
Restart the repaired SmartStruxure servers by running the warm start command from WorkStation.
The list of repaired SmartStruxure servers is obtained in the previous step, when you repair the LonWorks configurations.
Para obtener más información, consulte Warm Starting a SmartStruxure Server Device .
Para obtener más información, consulte Warm Starting an Enterprise Server .
Delete obsolete LonWorks objects from your SmartStruxure servers to increase available space.
Ensure that all SmartStruxure servers in the configuration are updated to version 1.8.1.23xxx before you delete the obsolete LonWorks objects.
Para obtener más información, consulte Delete Obsolete LonWorks Objects .
Para obtener más información, consulte Deleting Obsolete LonWorks Objects .
Prepare for Upgrade
Prior to upgrading a system, complete the tasks listed in the following flowchart. Related information can be found in the sections after the flowchart.
If you are upgrading WebReports, stop the Reporting Agent Windows service. Para obtener más información, consulte Stopping the Reporting Agent Windows Service .
Perform a new All data backup of the Enterprise Server and SmartStruxure server devices when backing up the system.
Para obtener más información, consulte Backing Up SmartStruxure Servers Manually .
For systems that include a Reports Server, back up the WebReports database.
Para obtener más información, consulte Backing Up the WebReports Database .
If you upgrade from version 1.5.x to version 1.9.x, write down the following information that you may need to reset after the upgrade:
Alarms that are disabled or hidden, to help you recreate the alarm list after the upgrade.
Acknowledge all reset alarms to create a record in the Event log, because the alarms will probably not be triggered again after the upgrade.
Para obtener más información, consulte Alarm Handling Issues .
Use the Services tool to stop the License Server Windows service. Para obtener más información, consulte Stopping the License Server .
Upgrade Building Operation Software
The following flowchart shows the tasks for upgrading the Building Operation software, except SmartStruxure server devices. Related information can be found in the sections after the flowchart.
Upgrade the License Server and License Administrator. Para obtener más información, consulte Upgrading the License Administrator and the License Server .
Upgrade the Device Administrator. Para obtener más información, consulte Upgrading the Device Administrator Installation .
Install the Enterprise Server and select Upgrade current version to . Para obtener más información, consulte Upgrading the Enterprise Server .
If a newer version of Enterprise Server already is installed, ensure that the Enterprise Server Windows service of this version is stopped.
If Device Administrator is running on the same PC as the Enterprise Server, you can simulate the Enterprise Server upgrade to see if you can fix configuration issues in the Enterprise Server before you upgrade it. Para obtener más información, consulte Previewing the Enterprise Server Database Upgrade .
The Enterprise Server Windows service automatically restarts after the Enterprise Server upgrade is complete. If the Enterprise Server Windows service does not start, restart the computer.
If you want to use a language pack in WebStation, install the language pack and change the language setting in WebStation.
Para obtener más información, consulte Adding a Language in WebStation .
Para obtener más información, consulte Cambio del idioma en WebStation .
Upgrade WorkStation and select the editor tools and language packs you want to upgrade. Para obtener más información, consulte Upgrading WorkStation and Client Tools Installation .
Keep one WorkStation at version 1.5.0.171xx , 1.6.2.12xx , 1.7.2.111xx , or 1.8.1.23xxx , in case you need to make configuration changes to SmartStruxure servers running 1.5.x, 1.6.x, 1.7.x, or 1.8.x, or if you need to perform LonWorks configuration preparations or repair locally on a SmartStruxure server device before version 1.9.x upgrade.
Upgrade SmartStruxure Server Devices
The following flowchart shows the tasks for upgrading SmartStruxure server devices. Related information can be found in the sections after the flowchart.
Use the upgraded Device Administrator to upgrade the databases of the SmartStruxure server devices using the IP network or USB port. Para obtener más información, consulte Uploading and Upgrading a SmartStruxure Server Device .
Open the Device Administrator upgrade log to get detailed information about the SmartStruxure server device upgrade process. Para obtener más información, consulte Opening the Upgrade Log .
You can postpone the upgrade of some SmartStruxure server devices running version 1.5, 1.6, 1.7, or 1.8, while you upgrade the Enterprise Server, WorkStation, and other SmartStruxure server devices to version 1.9.
Open the two conversion logs to see warning and error messages that occurred when the databases were upgraded.
Use Device Administrator to open the conversion log. Para obtener más información, consulte Opening the Conversion Log .
In Windows, open the high priority conversion log. Para obtener más información, consulte Opening the High Priority Conversion Log .
Determine if you can use the converted database for download or if you need to fix configuration issues in the SmartStruxure server device and perform a new upgrade of the SmartStruxure server device database.
Para obtener más información, consulte Conversion Logs .
Para obtener más información, consulte Log Entry Interpretation .
When you are comfortable with the content of the high priority conversion log, use Device Administrator to download the upgraded database to the SmartStruxure server device.
Para obtener más información, consulte Downloading an Upgraded Database to a SmartStruxure Server Device .
Reset and Confirm Server Functions
The following flowchart shows the tasks for confirming the functions of the SmartStruxure servers. Related information can be found in the sections after the flowchart.
Use the Software Administrator (or the Services tool) to verify that the Enterprise Server Windows service is running. Para obtener más información, consulte Starting the Enterprise Server Windows Service .
In WorkStation, verify that the control and monitoring operations of the Enterprise Server are functioning normally per the guidelines specified for your site.
In the Security Certificate Risk dialog box, click Trust certificate to temporarily trust the certificate and log on to the SmartStruxure server.
If you upgrade from version 1.5.x to version 1.9.x, reset the information that you copied before the upgrade:
Alarms that are disabled.
Para obtener más información, consulte Deshabilitación de una alarma .
Alarms that are hidden.
Para obtener más información, consulte Cómo ocultar una alarma .
If you upgrade from version 1.7.x or earlier, the upgrade changes the default SMTP port from 25 to 587. To use the SMTP port number 25, reset it after the upgrade.
Para obtener más información, consulte Selecting and Specifying an Email Server for Email Notifications .
In Binding Diagnostics, check for invalid or unresolved bindings. Para obtener más información, consulte Checking the Status of Bindings .
Replace any invalid or unresolved bindings with new bindings, using the Bindings view. Para obtener más información, consulte Bindings Management .
The system may require 10 to 30 minutes to complete the process of resolving invalid or unresolved bindings. Wait for this process to finish before editing the bindings.
In WorkStation, generate, add, and activate certificates for the SmartStruxure servers.
Para obtener más información, consulte Generating a Certificate .
Para obtener más información, consulte Adding a Certificate .
Para obtener más información, consulte Activating a Certificate .
After an upgrade from version 1.5, 1.6, or 1.7 to version 1.9 or later, you can delete obsolete LonWorks objects from your SmartStruxure server devices to increase available space. This must be done when the whole system has been upgraded.
Para obtener más información, consulte Delete Obsolete LonWorks Objects .
Para obtener más información, consulte Deleting Obsolete LonWorks Objects .
Ensure that you have detached the database from the computer where the previous version of webreports was installed, and that you have saved all the files in C:\Program Files (x86) \Schneider Electric StruxureWare\ Building Operation Reports Installation \DatabaseFiles to a convenient location .
AvisoIf you are attaching the database to a different computer, save the database files to an external device such as a USB memory device.
At the computer where you want to install the next version of WebReports, transfer all the database files to C:\Program Files (x86)\Schneider Electric StruxureWare\Building Operation Reports Installation \DatabaseFiles .
Open SQL Server Management Studio (type SQL in the Start menu Search box).
Right-click the Databases folder and then click Attach .
In the Attach Databases dialog box, click Add and then select the detached database.
You should now install the next version of WebReports on the computer where you attached the WebReports database. Para obtener más información, consulte Installing WebReports .
Enterprise Server System Upgrade Workflow
Installing WebReports