You install Wireless Adapter - Advanced in a dropped ceiling and connect the adapter to an RP-C controller, AS-P server, or AS-B server to add Zigbee wireless connectivity to the controller or server.
Refer to the dimensional drawings before installing the adapter.
Ensure that you have the proper mounting hardware.
Find a suitable location on the ceiling for mounting the adapter.
Mark the place where the hole should be in the ceiling tile.
Remove the ceiling tile.
Create a 32 mm (1.250 inches) diameter mounting hole in the ceiling tile.
Use a hole saw or ceiling tile hole cutter to create the hole in the ceiling tile.
Mount the cradle and fasten it using the thumb nut.
Install the adapter in the cradle.
Connect the USB extension cable to the adapter.
Use the following USB cable ordered from Schneider Electric:
Plenum rated USB extension cable of length 3 m (10 ft) (part number SXWUSBCBL10002)
Connect the USB extension cable to the USB host port on the RP-C controller or automation server.
Reinstall the ceiling tile.
You can now use the adapter.