You install Wireless Adapter - Advanced on the exterior of a metal enclosure and connect the adapter to an RP-C controller, AS-P server, or AS-B server to add Zigbee wireless connectivity to the controller or server.
Refer to the dimensional drawings before installing the adapter.
Ensure that you have the proper mounting hardware.
Find a suitable location on the enclosure for mounting the adapter.
Make a hole to mount and fasten the cradle using one of the following methods:
Create a 32 mm (1.250 inches) diameter mounting hole in the front panel of the metal enclosure.
Remove a pre-punched knockout, a punched out, removable disc on the sides of the metal enclosure.
You can use a metal hole punch to create the hole in the front panel.
You can use a screwdriver and hammer to break out the knockout, then twist off the knockout with pliers.
Mount the cradle and fasten it using the thumb nut.
Install the adapter in the cradle.
Connect the USB extension cable to the adapter.
Use one of the following USB cables ordered from Schneider Electric:
USB extension cable of length 1 m (3 ft) (part number SXWUSBCBL10001)
Plenum rated USB extension cable of length 3 m (10 ft) (part number SXWUSBCBL10002)
Connect the USB extension cable to the USB host port on the RP-C controller or server.
You can now use the adapter.