209 Topic(s)
Use the Device Restart function to perform a device restart of the BACnet/IP controller.
You log on to the Commission mobile application to perform commissioning, flow balance, and checkout operations on BACnet/IP controllers.
When connecting to a network at the job site, the Commission mobile application device must have either a dynamic or static IP address.
When the Relay 10 module is configured on the RP-C, you can log into the Commission mobile application and configure the following inputs and outputs:
You test the relay module relay outputs to ensure they are operating correctly
When Modbus is configured on a BACnet/IP controller, you can log into the Commission mobile application to view Modbus device level information.
You perform I/O checkout to verify that the wiring between the devices was done correctly and to verify that the physical inputs and outputs are working properly.
You connect to a device to begin all commissioning tasks.
You perform an I/O checkout to verify that installed modules match the RP controller configuration and are communicating properly. You configure RP controller expansion modules in WorkStation.