The output override function allows you to manually override outputs. This function can be used for testing, commissioning, and maintenance of equipment.
You can reset and restart the IP-IO and RP-IO modules in different ways depending on how long you press the reset button. The resets and restarts can affect the retention of values after restart based on the retain levels configured for the variables.
You perform the following steps to power up an IP-IO module.
You install an MP-C Display module on the MP-C or IP-IO module to enable manual override control of the analog and digital outputs. The MP-C Display module cannot be removed.
The IP-IO module device can be installed on a DIN rail or other flat surface inside a cabinet.
The universal inputs/outputs are ideal for any mix of temperature, pressure, flow, status points, and similar point types in a building control system.
IP-IO-UIO5DOFA4 has 9 I/O points and the IP-IO module is equipped with four pluggable terminal blocks and one fixed terminal block.
IP-IO-UIO10 has 10 I/O points and the IP-IO module is equipped with four pluggable terminal blocks.
IP-IO-DI10 has 10 I/O points and the IP-IO module is equipped with four pluggable terminal blocks.
Use the Pulse Period Configuration screen to configure a pulse period for a digital pulsed output or tristate pulsed output.