Concetto
Automation Server Communication Ports
The Automation Server has the following communication ports:
1 Ethernet 10/100 megabit port
2 RS-485 ports
2 LonWorks (TP/FT and RS-485) ports
2 USB host ports
1 USB device port
1 backplane I/O bus port
|
Communication port |
Connection |
|
Ethernet 10/100 |
IP, LAN/WAN, Modbus, BACnet |
|
RS-485 COM A |
Modbus, BACnet |
|
RS-485 COM B |
Modbus, BACnet |
|
LonWorks (FT and RS-485) |
LonWorks |
|
USB host |
|
|
USB device |
Device Administrator |
|
Backplane I/O bus |
Internal power supply and I/O addressing |
There are two USB host ports facing down to connect to external devices, such as ADs. The USB device port on the front is intended for program download from a PC by means of Device Administrator. It is connected to a PC or a downstream port of a hub.
The Ethernet communication is performed over a 10/100BaseTX, 10 or 100 Mbps, twisted pair network. The network is connected to the Automation Server by an RJ45 connector.
Hardware Overview
Automation Servers
AD v1
AD v2