Product version

Log on to rate and give feedback 1 2 3 4 5

Products: AS-B, Enterprise Central, Enterprise Server, AS-P, Virtual Project Servers

Functionalities: Alarms

Product version: 3.2, 3.3, 2022

10/15/2020

System Alarm ID NW8 S-NW8 Z

Listed below are the System Alarms with IDs that begin with the letters NW8 S-NW8 Z.

Table: System Alarms NW8 S

System Alarm ID	Description
NW8 Sensor input failure	The controller has detected an input sensor range failure.
NW8 Setpoint out of range	The Flo2 Remote Setpoint is enabled and out of range.
NW8 System fault 32	Missing changeover input for an MnHpfc fan coil application.

Table: System Alarms NW8 U

System Alarm ID	Description
NW8 UI diagnostic	The measured input value at UI:xx (from UI:1 to UI:8) is outside the standard range for the configured sensor for a MICROZONE II controller.
NW8 Unrecognized command	The controller did not recognize the command.

Table: System Alarms NW8 Z

System Alarm ID	Description
NW8 Zone temperature out of range	The MicroFol II zone temperature is out of range.