Log on to rate and give feedback
1
2
3
4
5
Log on to rate
0
Concept
Products:
MP-C
Functionalities:
Hardware
Product version:
2023, 2024, 7.0
6/20/2023
High Power Relay Outputs
The main application of the high power relay output is to power an electrical heating element directly.
The outputs can be configured as one of the following types:
Digital output
Digital pulsed output
Pulse width modulated output
Consider the expected number of operation cycles specified for the relay output (cycle life rating) when configuring the period for a pulse width modulated (PWM) output point.
Outputs
The DO high power relay outputs are Form A digital outputs, which means the outputs are normally open contacts with one common terminal (C) and one normally open terminal (NO). The terminals are isolated from signal ground.
Figure:
Form A digital output internal configuration
Specifications
Channels, MP-C-15A
|
1, DO7
|
Channels, MP-C-18A
|
1, DO8
|
Channels, MP-C-18B
|
0
|
Channels, MP-C-24A
|
0
|
Channels, MP-C-36A
|
0
|
Channels, MP-C-24A-M
|
0
|
Channels, MP-C-36A-M
|
0
|
Contact rating
|
250 VAC/24 VDC, 12 A, Pilot Duty (B300)
|
Switch type
|
Form A Relay
|
Single Pole Single Throw
|
|
Normally Open
|
|
Isolation contact to system ground
|
5000 VAC
|
Cycle life (Resistive load)
|
At least 100,000 cycles
|
Minimum pulse width
|
100 ms
|
MP-C Controllers
MP-C Models
MP-C Onboard I/O