Conceito
Electrician Workflow for the eCommission Application
Use this workflow with the eCommission SmartX Controllers mobile application to check out I/O following the installation and wiring of MP Series controllers and other devices. Complete the tasks listed in the following flowchart. Information related to each task can be found in the sections following the flowchart.
Physically wire together the MP Series controllers and other devices that are to be connected.
Connect the eCommission application to the MP Series controllers.
Para mais informações, consulte Connection and Architecture Options .
Start the eCommission application and log in, and then discover MP Series controllers on the network.
Para mais informações, consulte Downloading and Starting the eCommission SmartX Controllers Mobile Application .
For each MP Series controller, perform checkout of its inputs and outputs.
Para mais informações, consulte Performing I/O Checkout .
After connecting and checking out the MP Series controllers, you can proceed to other tasks as needed:
Capture device information from the controllers
Para mais informações, consulte Capturing a Device with the Controller List Creator .
Connection and Architecture Options
Downloading and Starting the eCommission SmartX Controllers Mobile Application
Performing I/O Checkout
Capturing a Device with the Controller List Creator
Connection Workflow for the eCommission Application
Fluxos de trabalho de técnico para aplicação eCommission
Fluxo de trabalho de técnico de equilíbrio de fluxo