Connection Workflow for the eCommission Application

Use this workflow to connect the eCommission SmartX Controllers mobile application to BACnet/IP controllers.

Related information can be found in the sections that follow the flowchart.

action_zoom_plus_stroke

Imagem: eCommission Application Connection Workflow

Download, install, and activate the eCommission application

Download, install, and activate the eCommission application, and accept the end user license agreement.

Power up the controllers

Power up the BACnet/IP controllers.

Para mais informações, consulte Powering Up MP-C .

Para mais informações, consulte Powering Up MP-V .

Prepare a wired or wireless connection for eCommission application

Prepare a wired or wireless connection for use with the eCommission application mobile device.

Connection Type	More Information
Wired connection to a single controller	Para mais informações, consulte Connecting to Single BACnet/IP Controller by Wire .
Wired connection to a network of controllers	Para mais informações, consulte Connecting to Network of BACnet/IP Controllers by Wire .
Wireless connection to a network of controllers via a WiFi router	Para mais informações, consulte Connecting to Network of BACnet/IP Controllers through WiFi Router .
Wireless connection to a network of controllers via a wireless access point	Para mais informações, consulte Connecting to Network of BACnet/IP Controllers through a Wireless Access Point .

Start the eCommission application and discover controllers

Start the eCommission application and then discover the BACnet/IP controllers on the network.