Koncept
Connection Workflow for the Commission Mobile Application
Use this workflow to connect the Commission mobile application to BACnet/IP controllers.
Related information can be found in the sections that follow the flowchart.
Download, install, and log on to the Commission mobile application, and then accept the Terms of use agreement.
Mer information finns i Logging on to the Commission Mobile Application .
Power up the BACnet/IP controllers.
Mer information finns i Powering Up MP-C .
Mer information finns i Powering Up MP-V .
Mer information finns i Powering Up an RP-V Controller .
Prepare a wired or wireless connection for use with the Commission mobile application mobile device.
|
Connection Type |
More Information |
|
Wired connection to a single controller |
Mer information finns i Connecting to Single BACnet/IP Controller by Wire . |
|
Wired connection to a network of controllers |
Mer information finns i Connecting to Network of BACnet/IP Controllers by Wire . |
|
Wireless connection to a network of controllers via a WiFi router |
Mer information finns i Connecting to Network of BACnet/IP Controllers through WiFi Router . |
|
Wireless connection to a network of controllers via a wireless access point |
Mer information finns i Connecting to Network of BACnet/IP Controllers through a Wireless Access Point . |
Start the Commission mobile application and then discover the BACnet/IP controllers on the network.
Mer information finns i Logging on to the Commission Mobile Application .
Connection and Architecture Options
Logging on to the Commission Mobile Application
Powering Up MP-C
Powering Up MP-V
Powering Up an RP-V Controller
Connecting to Single BACnet/IP Controller by Wire
Connecting to Network of BACnet/IP Controllers by Wire
Connecting to Network of BACnet/IP Controllers through WiFi Router
Connecting to Network of BACnet/IP Controllers through a Wireless Access Point
Downloading and Starting the eCommission SmartX Controllers Mobile Application