Concept
RP-C Models
The RP-C controller is available in seven models that support both BACnet/IP and MS/TP communication. These seven models offer six different combinations (sets) of I/O point types and CPU types. Four of the models support 24 VAC/VDC input power and three of them support 230 VAC. One of the 230 V models has self-locking device connectors instead of screw terminals. The RP-C controller also comes in three models that only support BACnet MS/TP communication. These three models offer three different sets of the number of I/O points and types of I/O points and support 24 VAC/VDC input power.
|
Range |
Model |
BACnet |
I/O–CPU Set |
I/O Points |
CPU Type |
Input Power |
|
SpaceLogic RP-C Advanced |
RP-C-12A-F-24V |
IP or MS/TP a |
12A |
12 |
Single-core |
24 VAC or 24-30 VDC |
|
SpaceLogic RP-C Advanced |
RP-C-12B-F-24V |
IP or MS/TP a |
12B |
12 |
Single-core |
24 VAC or 24-30 VDC |
|
SpaceLogic RP-C Advanced |
RP-C-12C-F-24V |
IP or MS/TP a |
12C |
12 |
Single-core |
24 VAC or 24-30 VDC |
|
SpaceLogic RP-C Advanced |
RP-C-16A-F-230V |
IP or MS/TP a |
16A |
16 |
Single-core |
230 VAC |
|
SpaceLogic RP-C Pro |
RP-C-16B-F-24V |
IP or MS/TP a |
16B |
16 |
Dual-core |
24 VAC or 24-30 VDC |
|
SpaceLogic RP-C Pro |
RP-C-16B-F-230V |
IP or MS/TP a |
16B |
16 |
Dual-core |
230 VAC |
|
SpaceLogic RP-C Pro Plus |
RP-C-16C-F-230V |
IP or MS/TP b |
16C |
16 |
Dual-core |
230 VAC |
|
EasyLogic RP-C |
RP-C-12A-M-24V |
MS/TP |
12A |
12 |
Single-core |
24 VAC or 24-30 VDC |
|
EasyLogic RP-C |
RP-C-12B-M-24V |
MS/TP |
12B |
12 |
Single-core |
24 VAC or 24-30 VDC |
|
EasyLogic RP-C |
RP-C-16A-M-24V |
MS/TP |
16A |
16 |
Single-core |
24 VAC or 24-30 VDC |
- Adapter required: Isolated RS-485 Adapter (SXWISORS48510001), Non-isolated RS-485 Adapter (SXWNISORS48510001), or RS-485 Power Adapter (SXWNISORS485P10001).
- Adapter required: Non-isolated RS-485 Adapter (SXWNISORS48510001) or RS-485 Power Adapter (SXWNISORS485P10001). Not supported: Isolated RS-485 Adapter (SXWISORS48510001).
For more information, see RP-C Onboard I/O .
For more information, see RP-C Built-in Power Supply .
All RP-C models have the same small footprint, except for RP-C-16C-F-230V which has the same height and depth as the other models but is significantly wider. RP-C-16C-F-230V differs from the other RP-C models also with regards to connectors, number of communications ports, configurable I/O point types, and other features.
The EasyLogic RP-C models differ significantly from the SpaceLogic RP-C models not only in terms of the supported BACnet communication protocol, but also with regards to the set of communication ports and several other features.
The EasyLogic models have an “-M” in the product name.
|
Feature |
RP-C-12A-F-24V, RP-C-12B-F-24V, RP-C-12C-F-24V, RP-C-16A-F-230V |
RP-C-16B-F-24V, RP-C-16B-F-230V |
RP-C-16C-F-230V |
RP-C-12A-M-24V, RP-C-12B-M-24V, RP-C-16A-M-24V |
|
Built-in wireless connectivity |
yes |
yes |
yes |
no a |
|
Ethernet ports |
2 |
2 |
2 |
0 |
|
USB ports |
2 b |
2 b |
1 c |
0 |
|
RS-485 ports with RJ45 interface |
2 (Com A, Com B) d |
2 (Com A, Com B) d |
3 (Com A, Com B, Com C) d |
1 (Com A) d |
|
RS-485 ports supporting Isolated RS-485 Adapter e |
Com B |
Com B |
- |
- |
|
RS-485 ports supporting Non-isolated RS-485 Adapter or RS-485 Power Adapter f |
Com A, Com B |
Com A, Com B |
Com A, Com B, Com C |
Com A |
|
RS-485 port with screw terminals |
0 |
0 |
0 |
1 g |
|
I/O and power input terminals/connectors |
Fixed screw terminals |
Fixed screw terminals |
Wieland connectors |
Fixed screw terminals |
|
MS/TP address configuration |
Software |
Software |
Software |
DIP switch |
|
Room bus support |
yes |
yes |
yes |
no |
|
Sensor bus support |
yes |
yes |
yes |
yes h |
|
Modbus support |
yes i |
yes i |
yes |
yes h |
|
RTD sensor support |
yes |
yes |
yes |
no |
|
LED(s) |
1 j |
1 j |
1 j |
1 j |
|
Real-time clock |
yes |
yes |
yes |
no k |
|
Input power |
24 VAC or 24-30 VDC (24 V models) 230 VAC (230 V model) |
24 VAC or 24-30 VDC (24 V model) 230 VAC (230 V model) |
230 VAC |
24 VAC or 24-30 VDC |
|
Power input type |
24 V models: Non-isolated 230 V model: Isolated |
24 V model: Non-isolated 230 V model: Isolated |
Isolated |
Isolated |
|
CPU type |
Single-core |
Dual-core |
Dual-core |
Single-core |
|
Memory (RAM / NOR flash / FRAM) |
6 MB / 48 MB / 128 kB |
128 MB / 64 MB / 128 kB |
128 MB / 64 MB / 128 kB |
6 MB / 32 MB / 128 kB l |
- The SpaceLogic Bluetooth Adapter (SXWBTAECXX10001) can be used to add wireless connnectivity to the controller. The adapter is connected to a SpaceLogic Sensor on the Sensor Bus.
- 1 USB host port and 1 USB device port.
- 1 USB host port.
- Load: max. 3 W per port.
- Isolated RS-485 Adapter (SXWISORS48510001) can be used for converting the RS-485 port with RJ45 interface to screw terminals.
- Non-isolated RS-485 Adapter (SXWNISORS48510001) and RS-485 Power Adapter (SXWNISORS485P10001) can be used for converting the RS-485 port with RJ45 interface to screw terminals. RS-485 Power Adapter (SXWNISORS485P10001) can also be used for power injecton on Room Bus or Sensor Bus.
- Dedicated for BACnet MS/TP bus. Removable 3-pole screw terminal block.
- The RS-485 Com A port can be configured for either Sensor Bus or Modbus.
- Either the RS-485 Com A port (Sensor Bus) or RS-485 Com B port (Room Bus) can be reconfigured for Modbus.
- Status LED.
- Only RP-C-16A-M-24V has a real-time clock.
- RP-C-12A-M-24V and RP-C-12B-M-24V with hardware version earlier than 01 and RP-C-16A-M-24V with hardware version earlier than 03 have a FRAM memory with a size of 8 kB. For these hardware versions, the use of Script programs is recommended to save FRAM memory space.
Differences Between RP-C Hardware Versions
There are a number of differences in hardware between different hardware versions of the RP-C-12A-F-24V, RP-C-12B-F-24V, RP-C-12C-F-24V, and RP-C-16A-F-230V controller models.
For more information, see Differences Between RP-C Hardware Versions .
Hardware Overview
RP-C Controllers
SpaceLogic RP-C Advanced
RP-C Onboard I/O
RP-C Built-in Power Supply
Differences Between RP-C Hardware Versions