Concept
RP-C Communication Ports
The RP-C contains a combination of Ethernet, USB, SmartX Sensor, and Connected Room Solution communication ports.
This combination includes the following ports:
Two 10/100 Ethernet ports
One USB host port
One USB device port
One Sensor bus port
One Room bus port
When both Ethernet ports are enabled, they function as an onboard Ethernet switch. Disabling the second Ethernet port disables the switching function. The switching function enables flexible network topologies. Pour plus d'informations, voir SmartX IP Controller Network Topologies . The second port also provides a connection point for a laptop running the eCommission SmartX Controllers mobile application.
The two USB ports are reserved for future use.
The Sensor bus port is designed for connection of SmartX Sensors. Pour plus d'informations, voir SmartX IP Controller Sensor Bus .
The Room bus port is designed for connection of RP Series expansion modules and multi-sensors for connected room solutions. Pour plus d'informations, voir RP-C Room Bus .
Hardware Overview
RP-Cs
SmartX IP Controller Network Topologies
SmartX IP Controller Sensor Bus
RP-C Room Bus