earth_america
user_standard Iniciar sesión
action_search_stroke
earth_america
Log on to rate and give feedback 1 2 3 4 5 Log on to rate
0
Concepto

Concepto


Productos RP-C, RP-C-EXT-IS-BLE, RP-C-EXT-MS-BLE
Funcionalidades: Hardware
Versión del producto: 2022, 2023, 2024
05/04/2022

RP Controller Expansion Sensor Module LED

arrow1_rotationStatus LED

There is one LED on the RP controller expansion sensor modules. The LED is integrated with the Set button.

 
action_zoom_plus_stroke Sensor module LED
Figura: Sensor module LED

Tabla: Sensor Module LED

Function

Color

Status

Red, Green

Status LED

The sensor module Status LED can be configured in the following modes:

  • Show status mode

  • Off mode

You configure the Status LED mode in the EcoStruxure Building Operation software. Para obtener más información, consulte Configuring RP Controller Expansion Modules .

Show status mode

The sensor module Status LED indicates the condition of the device.

Tabla: Sensor Module Status LED Patterns

LED Patterns

Condition

Recommended action

Green, constant

Normal operation, status OK.

No action required.

Green constant, with red flash (100 ms every 2 seconds)

Normal operation, status OK.

However, the sensor module has detected and logged an abnormal condition. When the RP-C has retrieved the diagnostics from the sensor module, the Status LED returns to constant green light. Para obtener más información, consulte RP Controller Expansion Module Diagnostics .

No action required.

Green, flashing (~1 Hz)

Device is starting or restarting.

No action required.

Green, flashing medium (~2 Hz)

Device is in maintenance mode. Para obtener más información, consulte RP Controller Expansion Module Maintenance Modes .

To exit the maintenance mode, configure a unique device address in the range supported by the RP-C controller model and then reset the device by disconnecting and reconnecting the device to the RP-C room bus. Para obtener más información, consulte Configuring the Room Bus Address for an RP Controller Expansion Sensor Module .Para obtener más información, consulte Connecting RP Controller Expansion Modules to an RP Controller .

Green, flashing fast (~5 Hz)

Device is initializing.

No action required.

Red, flashing (~1 Hz)

Device is non-operational due to a detected error.

Device is forced into maintenance mode.

Contact Schneider Electric Product Support Services for assistance.

Red, flashing fast (~5 Hz)

Device is inoperable due to a detected, non-recoverable error.

Contact Schneider Electric Product Support Services for assistance or return the device to Schneider Electric.

Red, constant

Device is inoperable due to a detected, non-recoverable error.

Return the device to Schneider Electric.

Off mode

The sensor module Status LED is disabled.

Consulte también

  • RP Controller Expansion Modules
  • RP-C-EXT-MS-BLE
  • RP-C-EXT-IS-BLE
  • Configuring the Room Bus Address for an RP Controller Expansion Sensor Module
  • Connecting RP Controller Expansion Modules to an RP Controller
  • Configuring RP Controller Expansion Modules
  • RP Controller Expansion Module Diagnostics
  • RP Controller Expansion Module Maintenance Modes
  • RP Controller Expansion Sensor Module Set Button
  • RP Controller Expansion Module LEDs
  • Status LEDs
  • RP-C Models