SpaceLogic RP-C-EXT-DALI-M-PD

Introduction

SpaceLogic™ RP-C-EXT-DALI-M-PD light module connects to the SpaceLogic RP room controllers and provides I/O expansion for lighting control with DALI (Digital Addressable Lighting Interface).

The DALI light module enables power supply and control of lights equipped with DALI ballasts (DALI control gear).

The DALI light module is a DALI-2 certified control device (application controller) with multi-master capability. DALI-2 compliance means benefits such as improved interoperability and easier installation and maintenance. The DALI light module can be used with DALI version-1 products because DALI-2 is designed to be backward compatible with DALI version-1. The multi-master capability of the DALI light module allows the module to function as a DALI master in a DALI network and can thus work together with DALI-2 sensors and push-buttons.

Lighting can be controlled by the RP controller through motion detection and light intensity measurement provided by the Multi-sensor or Insight-Sensor, or by SpaceLogic Sensors connected to the RP controller.

The DALI light module is part of the RP controller expansion modules for connected room solution and can be combined with other modules from this product range.

Features

The DALI light module has the following features:

Power and communications through the room bus
DALI-2 certified control device (application controller)
DALI multi-master function for communication with DALI sensors and push-buttons on the DALI bus, which minimizes wiring and installation costs
Group and individual addressing of DALI control gear (lights)
One DALI channel, which is split into four inputs/outputs (terminals), for DALI bus power supply and control of up to 32 lights and 16 input devices (the maximum number of lights and input devices per input/output is determined by the maximum inrush current)
Up to 16 DALI groups for common control of lights
Up to 16 DALI input devices in total. Each input device supports up to four sensors or buttons.
Simplified commissioning support for DALI lights connected to the same terminal
Energy saving by automatic disconnection of power to DALI drivers/ballasts when all lights on the same terminal are off
Support for on/off (relay) control of non-DALI lights on terminals not used for DALI lighting control
Four digital inputs for connection of light switches and window contacts. The digital inputs are SELV (Safety Extra-Low Voltage).
Measurement of energy consumption per module
Suitable for mounting in ceilings
Wieland connectors for quick and easy installation
Engage mobile application for room comfort settings
Status LED for the device
One status LED for each DALI input/output
Rotary switch for address configuration

DALI lighting control

The DALI inputs/outputs are connected to the power supply network through the DALI light module. For the DALI bus wires, you may use the standard installation equipment permitted for ELV (Extra-Low Voltage) installations. The DALI bus meets SELV (Safety Extra-Low Voltage) requirements.

The DALI-2 interface has the following features:

DALI groups can combine lights regardless of which outputs the lights belong to.
Lights that belong to the same DALI group are controlled simultaneously for switching on/off, dimming, and color temperature (tunable white) adjustment
Management of ballast and lamp alarms
Automatic addressing of lights

Simplified commissioning support

By using a DALI channel group, you can control all DALI lights connected to the same input/output (terminal) as one logical light, which simplifies and speeds up the commissioning process.

Room bus

The RP controller room bus allows RP controller expansion modules to be connected to the controller for people counting, motion detection, luminosity and sound pressure level measurements, Bluetooth Low Energy based applications, and control of electric lights and window blinds.

The RP-C Pro and RP-C Pro Plus controller room bus supports up to nine connected RP controller expansion modules with the following restrictions:

Maximum of two DALI light modules
Maximum of two SMI blind modules
Maximum of seven Multi-sensor or Insight-Sensor devices

The RP-C Advanced controller room bus supports up to six connected RP controller expansion modules with the following restrictions:

Maximum of two DALI light modules
Maximum of two SMI blind modules
Maximum of four Multi-sensor or Insight-Sensor devices

The RP-V Advanced controller room bus supports up to four connected RP controller expansion modules with the following restrictions:

Maximum of one DALI light module
Maximum of one SMI blind module
Maximum of two Multi-sensor or Insight-Sensor devices

Maximum total length of the room bus is 72 m (236 ft).

Engage mobile application

The Engage mobile application enables control of room temperature, fan speed, lights, and blinds/shades directly from a smartphone. A user can manage these settings when the application is connected to the RP controller.

The Engage mobile application is free and available for download from Google Play and Apple App Store.

For more information, see the Engage Specification Sheet.

Product	Part number
RP-C-EXT-DALI-M-PD	SXWREDAMPD10001
DIN-RAIL-CLIP, DIN-rail end clip package of 25 pieces	SXWDINEND10001
Mounting plate - RP controller expansion modules package of 5 pieces	SXWREMPK510001

Specifications

Electrical

Nominal voltage

230 VAC

Operating voltage range

+/-10 %

Frequency

50/60 Hz

Maximum current consumption

10 A

Room bus power consumption

0.3 W (24 VDC)

Protection

Maximum 16 A external fuse (circuit breaker) is needed

Overvoltage category

III

Environment

Ambient temperature, operating

0 to 50 °C (32 to 122 °F)

Ambient temperature, storage

-20 to +70 °C (-4 to +158 °F)

Humidity

20 to 90 % RH non-condensing

Pollution degree

Material

Plastic flame rating

UL94 V-0

Ingress protection rating

IP 20

Mechanical

Dimensions

198 W x 110 H x 64 D mm (7.8 W x 4.3 H x 2.5 D in.)

action_zoom_plus_stroke

Weight

0.433 kg (0.955 lb)

Recommended installation

DIN rail or flat surface in a cabinet ^a

Connectors

Power input: 1 x 3-pin Wieland GST15i3 connector

DALI inputs/outputs: 4 x 5-pin Wieland GST15i5 connector

Digital inputs: 4 x 2-pin Wieland GST15i2 connector

Optional mounting plate

The mounting plate is used to facilitate mounting and cable management for the RP controller expansion module as well as to provide strain relief for the connectors.

Dimensions

202 W x 268.3 H x 17.8 D mm (8.0 W x 10.6 H x 0.7 D in.)

action_zoom_plus_stroke

Weight

0.306 kg (0.675 lb)

Compatibility

EcoStruxure BMS server communication

EcoStruxure Building Operation

version 3.1.1 and later

Energy metering support

EcoStruxure Building Operation

version 3.3.1 and later

DALI multi-master support

EcoStruxure Building Operation

version 4.0.1 and later

Support for simplified commissioning and energy saving for DALI lights, and relay control of non-DALI lights

EcoStruxure Building Operation

version 5.0.3 and later

Agency compliances

Emission

RCM; BS/EN 61000-6-3; BS/EN IEC 63044-5-2; FCC Part 15, Sub-part B, Class B

Immunity

BS/EN 61000-6-2; BS/EN IEC 63044-5-3

Safety standards

BS/EN 60730-1; BS/EN 60730-2-11; BS/EN IEC 63044-3

Digital addressable lighting interface

IEC 62386-101; IEC 62386-103

Communication ports

Room bus

RS-485

Dual RJ45 ports for daisy-chain configurations

Use a Cat 5 (or higher) cable

Maximum total length of the room bus: 72 m (236 ft)

Room bus protection

Transient voltage suppressors on communication and power signals

Hardware

Main microcontroller

CPU type

ARM Cortex-M4 single-core

Frequency

80 MHz

SRAM (embedded)

320 KB

Flash memory (embedded)

1024 KB

Memory

NOR flash memory

16 MB

DALI microcontroller

CPU type

ARM Cortex-M0 single-core

Frequency

32 MHz

SRAM (embedded)

8 KB

Flash memory (embedded)

64 KB

Additional hardware

Status indicator

LED (green and red) that shows the status of the device

Light status indicator

One status LED (green) for each DALI input/output

Address switch

Rotary switch 0 to 9

Set button

Push-button switch

Energy metering

Energy consumption measurement

The energy consumption is measured in Wh, shared by the four outputs.

Accuracy class (according to IEC 61557-12)

Active energy measurement: Class 1

Typical measurement accuracy at room temperature

20 to 100 W: 5%

100 to 3000 W: 1%

DALI inputs/outputs

Inputs/outputs

4, Light 1 to Light 4

The four inputs/outputs share one DALI channel.

Input/output terminals

N, PE, L, DA+, and DA-

DALI bus voltage

18 VDC

Maximum supply current

250 mA

Guaranteed supply current

64 mA

Maximum cable length

See the SpaceLogic Hardware Reference Guide

Power distribution

230 VAC (same voltage as power supply)

Maximum 5 A load per output

Maximum 10 A total load for the 4 outputs

Maximum 165 A inrush current (<20 ms) per output

Maximum 800 A inrush current (<200 µs) per output

DALI devices

Supported control gear

See table below.

Device type number	Type of control gear	Supported
Device Type 0 (DT0)	Fluorescent lamp control gear	Yes
Device Type 1 (DT1)	Control gear for self-contained emergency lighting	Yes
Device Type 3 (DT3)	Low-voltage halogen lamp control gear	Yes
Device Type 4 (DT4)	Incandescent lamp dimmers	Yes
Device Type 6 (DT6)	LED lamp control gear (LED modules)	Yes
Device Type 8 (DT8)	Color control gear	Yes ^a

Supported input device types

See table below.

Type/part number ^a	Type of input device	Supported ^bc
301	Push-buttons	Yes
302	Absolute input devices	Yes
303	Occupancy sensors	Yes
304	Light (luminosity) sensors	Yes

Digital inputs

Inputs

4, DI1 to DI4

Range

Dry contact, 0 to 5.0 VDC, 2.2 mA, SELV (Safety Extra-Low Voltage)

Table: Required External Connectors

Use	Part number	Reference	Connector type	Suitable for cable diameters mm (inches)	Marking	Color of coding /housing	Minimum order quantity
Power supply input	SXWRPCCONWWPOW	91.931.4053.1	Female	5.6–11 (0.22–0.43)	L, PE, N	Black /Black	100
DALI inputs/outputs	SXWRPCCONWWLIGHTPD	91.952.4453.0	Male	8.5–12.5 (0.34–0.49)	N, PE, L, D2, D1 D2: DA+ D1: DA-	Pastel blue /White	50
Digital inputs	SXWRPCCONWDI	91.921.2353.0	Female	3.4–5.5 (0.14–0.21)	1, 2 1: DI1..4 2: RET	Light blue /White	100

The external connectors need to be ordered separately. The connectors can be ordered in quantities of 50 or 100 from Schneider Electric using the above part numbers. The connectors can also be ordered directly from Wieland using the above reference numbers. For more information, see the Wieland Electric web site.

Functionality

Products

How to

Specifications

Troubleshooting

Developers Reference

Specifications

SpaceLogic RP-C-EXT-DALI-M-PD

Introduction

Features

Specifications

Connections

Functionality

Products

How to

Specifications

Troubleshooting

Developers Reference

Specifications

SpaceLogic RP-C-EXT-DALI-M-PD

Introduction

Features

Specifications

Connections

See Also