Hur göra
Setting an EcoStruxure PCT Server in Password Reset Mode
You set an EcoStruxure PCT Server to password reset mode so that you can create a new password if the old one was forgotten.
You can reset the administrator password on your EcoStruxure Building Operation servers. Related information can be found in the sections after the flowchart.
In Device Administrator, set the Enterprise Server, Enterprise Central and automation server in reset mode.
Mer information finns i Setting an EcoStruxure BMS Server to Password Reset Mode .
In Project Configuration Tool, set the Project Configuration Tool server in reset mode.
Mer information finns i Setting an EcoStruxure PCT Server in Password Reset Mode .
In WorkStation, copy the session ID that you need to get a temporary password.
Mer information finns i Copying the Session ID when Resetting the Password .
Contact your local Schneider Electric Buildings support team and send them the session ID.
Log on to the server using the temporary password supplied by Schneider Electric Buildings support team and create the new password.
Mer information finns i Resetting the Password using WorkStation .
In the Project Configuration Tool, select the server.
Right-click the server and click Set the server in password reset mode .
The PCT server is now in password reset mode for 24 hours.
Password Reset Workflow
Connecting to an Automation Server Using the USB Device Port
Connecting to an Automation Server Using the IP Network
Copying the Session ID when Resetting the Password