Log on to rate and give feedback
1
2
3
4
5
Log on to rate
0
Concept
Products:
RP-C
Functionalities:
Hardware
Product version:
2022, 2023, 2024, 7.0
3/11/2022
Wire Sizes and Lengths for the DALI Bus of the Zigbee DALI Module
This section provides recommendations on wire sizes and lengths for the DALI bus of the Zigbee DALI module (RP-C-EXT-ZB-DALI).
The DALI bus is connected to the Light outputs of the Zigbee DALI module. The Light outputs have two terminals, labeled DA+ and DA-, to which the two-wire bus is connected.
The recommendations are for guidance only. Other wire sizes and lengths may be used, depending on wiring rules and when appropriate.
Only copper wires should be used for the DALI bus.
|
Minimum Cross-sectional Area |
Cable Length |
|
0.75 mm² (18 AWG) |
Up to 150 m (492 ft) |
|
1.0 mm² (17 AWG) |
Up to 200 m (656 ft) |
|
1.5 mm² (15 AWG) |
Up to 300 m (984 ft) |
I/O Wiring
Wire Sizes and Lengths
Wire Sizes and Lengths for the RP Controller Expansion Zigbee Modules
Zigbee DALI Light Output and Power Output