Концепт
Meter Object
The meter object is used to log and calculate values from a physical meter using a point, called monitored variable, in the EBO server. The monitored variable can, for example, be a Modbus point or a BACnet point.
Adjusted Meter Value
To get correct values in the meter object, the meter value in the meter object must be configured to handle for example meter roll over.
Более подробную информацию см. Adjusted Meter Value .
Meter Object Unit
The unit in the meter object is used for calculated consumption, logging and maximum setting for meter roll over on the physical meter. To get correct values in the meter object, the monitored variable must have the same unit as the active energy unit in the physical meter.
Более подробную информацию см. Meter Object Unit .
Meter Replacement
When you replace a physical meter, you need to make adjustment to the meter object that monitor the physical meter.
Более подробную информацию см. Meter Replacement .
Reset Meter Object
Meter objects can be reset. This is typically done after you have tested a meter object configuration or when you want to restart the calculation and logging in a meter object.
Более подробную информацию см. Reset a Meter Object .
Unexpected Meter Object Values
The meter object can take different status and modes.
Более подробную информацию см. Meter Status and Meter Mode .
Built in Meter Log
The meter object has a built in meter log. The meter log logs the output of the meter object. A meter log can be presented in a trend chart or in a trend log list.
Use the calculation method Delta when you want to show consumption over periods in Dashboards, trend log lists and trend charts.
Meter Object Unit
Adjusted Meter Value
Meter Replacement
Reset a Meter Object
Meter Status and Meter Mode