Концепт
Meter Status and Meter Mode
The meter object can take different status and modes.
Meter Mode
The meter object can be in the following modes:
The meter object works as expected. It logs and calculates consumption.
A meter replacement is initiated.
Более подробную информацию см. Meter Replacement .
When an unexpected value is detected, the meter object enters the mode Action needed and the status of the meter object is set to inform the user that something unexpected happened.
A meter object in Action needed mode pauses the calculations and does not update the meter values.
You start the meter object again with the command Confirm meter setting .
Более подробную информацию см. Confirming a Meter Object Settings .
The command Confirm meter settings open a dialog where you can change the maximum settings and set the start value of the connected meter. For example, if the mode Action needed was caused by an unexpected meter replacement.
Meter Object
Meter Replacement
Confirming a Meter Object Settings