Ratgeber
Configuring a Variable Triggered Trend Log
You configure the properties of a variable triggered trend log to meet the unique needs of your site.
The variable triggered trend log records the variable when the conditions of the associated trigger variable are met. Use this type of trend log when the log interval is scheduled to log monthly or yearly, or when another device is used to trigger the log.
For example, in the figure below, the variable triggered trend log records a variable every time the associated trigger variable, for example, a switch, changes to true. The records are printed in a trend chart. Notice that the variable triggered trend log records the variable without any regard to time or delta.
You can configure the trend log to collect data when the trigger value changes to True, changes to False, or All changes.
A variable triggered trend log can be created with initial meter settings. The variable triggered trend log supports the meter change command and meter consumption calculation. You can view the last meter change information on the variable triggered trend log object. Für weitere Informationen siehe Meter Function .
In WorkStation, in the System Tree pane, select the variable triggered trend log you want to configure.
On the File menu, click Properties .
In the properties dialog box, click the Basic tab.
Edit the basic properties:
Tabelle: Variable Triggered Trend Log Properties - Basic Tab
Component
Description
Status
Displays the status of the trend log.
Enabled
Displays True if the trend log is enabled.
Logged variable
Enter the variable you want to log.
Delta
Select the minimum value change that triggers a new record.
Trigger variable
Enter the variable that triggers the trend log to start recording.
Trigger condition
Select when you want the variable recorded: when the trigger variable changes to True, changes to False, or at all changes.
Für weitere Informationen siehe Variable Triggered Trend Logs .
Log size
Select the number of records to store before old records are overwritten, including internal records generated by the trend log.
Für weitere Informationen siehe Log Record Storage .
Clear when enabled
Select True to clear the trend log when it is enabled.
Click the Meter info tab.
Edit the meter properties:
Tabelle: Meter Info Tab
Property
Description
Is meter log
Select True if the trend log meter function is active.
Für weitere Informationen siehe Meter Function .
Meter change time
Enter the time when the meter was changed.
Meter change user
Enter the name of the user account that changed the meter.
End time
Enter the time when the old meter was replaced.
End value
Enter the value the old meter had when it was replaced.
Start time
Enter the time when the new meter was installed.
Start value
Enter the value of the new meter when it was installed.
Meter constant
Enter the constant of the new meter. If the meter counts in kilo (10 3 ), the constant is 1000.
Min value
Enter the first value of the new meter after roll-over.
Max value
Enter the last value of the new meter before roll-over.
Click OK .
Variable Triggered Trend Logs
Variable Triggered Trend Log Properties – Basic Tab
Configure Dialog Box – Configuration Tab
Variable Triggered Trend Logs
Configure Dialog Box – Operation Tab
Log Record Storage
Meter Function
Trend Log Does Not Start Record Due to the Start Condition