Create Variable Status Alarm Wizard

Component	Description
Forced	Select to trigger the alarm when the monitored variable status is forced. Mer information finns i Force and Unforce Buttons .
Overridden	Select to trigger the alarm when the monitored variable status is overridden. Mer information finns i Output Override Status .
Monitored variable	Enter the path to the variable that is monitored by the alarm.
Disable alarm	Select to disable the alarm, for example, before deployment.
Alarm delay	Enter the time, in seconds, the alarm has to be within the reset criteria before the alarm state is changed from alarm to reset.
Reset delay	Enter the time, in seconds, the alarm has to be within the alarm criteria before the alarm is triggered.
Shunt variable 1	Enter the shunt variable that is used to enable or disable the alarm. Mer information finns i Shunt Variables .
Invert	Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Mer information finns i Shunt Variables .
Operator	Select AND or OR to add logic between the first and the second shunt variable. Mer information finns i Shunt Variables .
Shunt variable 2	Enter the second shunt variable that is used to enable or disable the alarm. Mer information finns i Shunt Variables .
Invert	Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Mer information finns i Shunt Variables .

Component

Description

Forced

Select to trigger the alarm when the monitored variable status is forced. Mer information finns i Force and Unforce Buttons .

Overridden

Select to trigger the alarm when the monitored variable status is overridden. Mer information finns i Output Override Status .

Monitored variable

Enter the path to the variable that is monitored by the alarm.

Disable alarm

Select to disable the alarm, for example, before deployment.

Alarm delay

Enter the time, in seconds, the alarm has to be within the reset criteria before the alarm state is changed from alarm to reset.

Reset delay

Enter the time, in seconds, the alarm has to be within the alarm criteria before the alarm is triggered.

Shunt variable 1

Enter the shunt variable that is used to enable or disable the alarm. Mer information finns i Shunt Variables .

Invert

Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Mer information finns i Shunt Variables .

Operator

Select AND or OR to add logic between the first and the second shunt variable. Mer information finns i Shunt Variables .

Shunt variable 2

Enter the second shunt variable that is used to enable or disable the alarm. Mer information finns i Shunt Variables .

Invert

Select to invert the shunt value, that is, enable the alarm when the shunt value is active and disable the alarm when the shunt value is inactive. Mer information finns i Shunt Variables .

Funktionalitet

Produkter

Hur göra

Specifikationer

Felsökning

Utvecklarreferens

Användargränssnitt

Create Variable Status Alarm Wizard – Alarm Trigger Page